iOS-自動打包及分發（一）
iOS-自動打包及分發（二）
iOS-自動打包及分發（三）

本篇介紹：自動打包及分發xcodebuild腳本。

由于xcodebuild我沒找到像fastlane環境下的那么多擴展工具可以使用，所以簡單些直接上我寫好的腳本代碼吧

#使用方法
if [ ! -d ./IPADir ];
then
mkdir -p IPADir;
fi

#計時
SECONDS=0

#取當前時間字符串添加到文件結尾
now=$(date +"%Y%m%d-%H:%M")

# 獲取 setting.plist 文件路徑
setting_path=/Users/mecrt/Desktop/DaBao_Demo/Setting.plist

# 項目名稱
project_name=$(/usr/libexec/PlistBuddy -c "print project_name" ${setting_path})

# 項目路徑 workspace路徑
project_path=$(/usr/libexec/PlistBuddy -c "print project_path" ${setting_path})
workspace_path="${project_path}/${project_name}.xcworkspace"

# scheme名稱
scheme_name=$(/usr/libexec/PlistBuddy -c "print scheme_name" ${setting_path})

# 項目版本
project_version=$(/usr/libexec/PlistBuddy -c "print project_version" ${setting_path})

# 配置打包樣式：Release、AdHoc、Debug
configuration=$(/usr/libexec/PlistBuddy -c "print configuration" ${setting_path})

# 發布地址：蒲公英->PGY，蘋果->AppStore
upload_address=$(/usr/libexec/PlistBuddy -c "print upload_address" ${setting_path})

# ipa包名稱：項目名+版本號+打包類型
ipa_name=$(/usr/libexec/PlistBuddy -c "print ipa_name" ${setting_path})

# ipa包路徑
ipa_path2=$(/usr/libexec/PlistBuddy -c "print ipa_path" ${setting_path})/${now}
ipa_path="${ipa_path2}-V${project_version}-${upload_address}"

# 打包配置plist文件路徑
plist_path=$(/usr/libexec/PlistBuddy -c "print plist_path" ${setting_path})

# 編譯build路徑
archive_path="${ipa_path}/${project_name}.xcarchive"

# 上傳到蒲公英設置
user_key=$(/usr/libexec/PlistBuddy -c "print user_key" ${setting_path})
api_key=$(/usr/libexec/PlistBuddy -c "print api_key" ${setting_path})
password=$(/usr/libexec/PlistBuddy -c "print password" ${setting_path})

if [${upload_address} == "AppStore" ];then
configuration="Release"
plist_path=${project_path}/exportAppstore.plist
else
if [ ${configuration} == "Release" ];then
plist_path=${project_path}/exportAppstore.plist
else
plist_path=${project_path}/exportAdHoc.plist
fi
fi

echo '--正在清理工程--'
xcodebuild clean -configuration ${configuration} -quiet  || exit

echo '清理完成-->>>--正在編譯工程:'${configuration}
xcodebuild archive -workspace ${workspace_path} -scheme ${scheme_name} \
-configuration ${configuration} \
-archivePath ${archive_path} -quiet  || exit

echo '編譯完成-->>>--開始ipa打包'
xcodebuild -exportArchive -archivePath ${archive_path} \
-configuration ${configuration} \
-exportPath ${ipa_path} \
-exportOptionsPlist ${plist_path} \
-quiet || exit

if [ -e ${ipa_path}/${ipa_name}.ipa ]; then
echo '--ipa包已導出--'
open $ipa_path
else
echo '--ipa包導出失敗--'
fi
echo '打包ipa完成-->>>--開始發布ipa包'

if [ ${upload_address} == "AppStore" ];then
# 驗證并上傳到App Store，上傳AppStore的參數設置等需要再研究查找核對。
altoolPath="/Applications/Xcode.app/Contents/Applications/Application Loader.app/Contents/Frameworks/ITunesSoftwareService.framework/Versions/A/Support/altool"
"$altoolPath" --validate-app -f ${ipa_path}/${ipa_name}.ipa -u iosmanager@system.ifohoo.com -p zxF515?611 -t ios --output-format xml
"$altoolPath" --upload-app -f ${ipa_path}/${ipa_name}.ipa -u iosmanager@system.ifohoo.com -p zxF515?611 -t ios --output-format xml
else
curl -F "file=@${ipa_path}/${ipa_name}.ipa" -F "uKey=${user_key}" -F "_api_key=${api_key}" -F "password=${password}" https://www.pgyer.com/apiv1/app/upload
fi

# 輸出總用時
echo "執行耗時: ${SECONDS}秒"
exit 0

上面的執行腳本原理和fastlane相似，接下來的三個plist文件配置也和fastlane大同小異。
首先是exportAppStore.plist文件

圖片.png

接著是exportAdHoc.plist文件

圖片.png

最后是Setting.plist文件

圖片.png

淺顯的倒弄了下、不足之處見諒，還望指正、共同交流學習。