CV 細節
| 名稱 | 默認值 | 描述 |
|---|---|---|
| Alias（別名） | 工作區中CV變量的名稱。 | |
| Description（描述） | CV變量描述。 | |
| Set Value Type [v]（設定值類型） | SetRange （設定范圍） | 此開關量(SetPoint/SetRange)用于指示CV是控制單個值(SetPoint設定點)還是范圍(SetRange設定范圍)。 |
| Tracking Flag [v]（跟蹤標簽） | 僅適用于SetPoint 型CV。此標簽用于指示當CV處于非控制狀態時（即INACTIVE），CV的設定范圍限是否會跟蹤計算CV值。 | |
| Calculated Value [t/v]（計算值） | 0.0 | 這是SMOCPro計算的CV值（僅輸出）。 |
| SetRange High [t/v]（設定范圍高限） | 0.0 | 其定義了控制器的設定范圍高限值，若是設定點型變量，則定義了設定點。 |
| SetRange Low [t/v]（設定范圍低限） | 0.0 | 其定義了控制器的設定范圍低限值。如果CV是設定點型，則此項輸入是灰色的。 |
| SetRange Entry High Limit [t/v]（設定范圍輸入高限） | 10001.0 | 該值定義了SetRange High所允許的最高值。 |
| SetRange Entry Low Limit [t/v]（設定范圍輸入低限） | -10001.0 | 該值定義了SetRange Low所允許的最低值。 |
| Remove Flag [t/v]（刪除標簽） | False | 此標簽(True/False)用于指示某CV是否接受控制(ACTIVE)或(INACTIVE)。 |
| Priority [t/v]（優先級） | 1 | 此參數定義了CV的優先級。此處的允許值是1~100。數值越低代表其優先級越高。通過相同的排序完成靜態不可行性的平衡。 |
| Setpoint Tracking Filter [v]（設定點追蹤濾波器） | 0 | 此參數將設置一階指數軌跡的時間常數(s)，并將其用于所有CV設定點或設定范圍的變化。 |
| Weight [v]（權重） | 自控制器 | 這是要傳遞到在線系統（不可編輯）的CV權重（Q值）。 |
| Calculated Constraint Flag [t/v]（計算約束標簽） | 0.0 | 計算CV值相對于CV限制（內核輸出參數）的約束活性（0：不受限，+ 1：高限，-1：低限）。只有當選中Advanced時才可見。 |
| Steady State Reachable Value [t/v]（可到達穩態值） | 0.0 | CV的預測穩態值（內核輸出參數）。只有當選中Advanced時才可見。 |
| Steady State Constraint Flag [t/v]（穩態約束標簽） | 0.0 | 穩態時的預測約束活性（0：不限制，+N：高限，-N：低限）（內核輸出參數）。 N值提供了約束活性的細節，1?100： CV約束的優先級，101：經濟優化，111：混和比例約束。只有當選中Advanced時才可見。 |
| Actual CV Status [t/v]（實際CV狀態） | INACTIVE | CV（內核輸出參數）的實際狀態(BAD/ACTIVE/ INACTIVE)。只有當選中Advanced時才可見。 |
| Remote Target Value [t/v]（遠程目標值） | 0.0 | 從實時優化器（RTO）獲取的CV目標值。只有當選中Advanced時才可見。 |
| Remote Target Remove Flag [t/v]（遠程目標刪除標簽） | True | 遠程目標值的刪除標簽(True/False)，只有刪除標簽設定為False時才有效。只有當選中Advanced時才可見。 |
| Remote Target Weight [t/v]（遠程目標權重） | 0.0 | 如果不是所有的CV目標都可以實現，則其表示了有效CV目標的相對重要性。只有當選中Advanced時才可見。 |
| Remote Target Status [t/v]（遠程目標狀態） | INACTIVE | CV目標（內核輸出參數）的實際狀態(BAD/ ACTIVE/INACTIVE)。只有當選中Advanced時才可見。 |
原文：
**CV Details **
| Name | Default Value | Description |
|---|---|---|
| Alias | Name of the CV variable in the workspace. | |
| Description | CV Variable description. | |
| Set Value Type [v] | SetRange | Switch (SetPoint/SetRange) to indicate if the CV is to be controlled to a single value (SetPoint) or within a range (SetRange). |
| Tracking Flag [v] | Used only for SetPoint-type CVs. This flag indicates whether or not the Setrange limits of the CV will track the calculated CV value when the CV is not being controlled (that is, it is Inactive). | |
| Calculated Value [t/v] | 0.0 | The value of the CV as calculated by SMOCPro (output only). |
| SetRange High [t/v] | 0.0 | This defines the SetRange High value for the controller, or the Setpoint if it is a SetPoint-type variable. |
| SetRange Low [t/v] | 0.0 | This defines the SetRange Low value for the controller. If the CV is of SetPoint-type this entry is grayed-out. |
| SetRange Entry High Limit [t/v] | 10001.0 | This value defines the highest value allowed for SetRange High. |
| SetRange Entry Low Limit [t/v] | -10001.0 | This value defines the lowest value allowed for SetRange Low. |
| Remove Flag [t/v] | False | Flag (True/False) to indicate if the CV should be controlled (ACTIVE) or not (INACTIVE). |
| Priority [t/v] | 1 | This parameter defines the priority of this CV. Allowed values here are 1-100. A lower value indicates a higher priority. Balancing of static infeasibilities is performed within the same rank. |
| Setpoint Tracking Filter [v] | 0 | This parameter sets the time constant (seconds) of a first-order exponential trajectory that will be applied to all SetPoint or SetRange changes for the CV |
| Weight [v] | From the controller. | This is the CV Weight (Q value) that will be transferred to the online system (not editable). |
| Calculated Constraint Flag [t/v] | 0.0 | Constraint activity (0:Not-limited, +1: High-limited, -1:Low-limited) of Calculated CV Value with respect to CV limits (Kernel output parameter). Visible only when Advanced option is selected. |
| Steady State Reachable Value [t/v] | 0.0 | The predicted steady state values of CVs (Kernel output parameter). Visible only when Advanced option is selected. |
| Steady State Constraint Flag [t/v] | 0.0 | The predicted constraint activity (0:Not-limited, +N:High-limited, -N:Low-limited) at steady state (Kernel output parameter). The value of N provides details on what has made constraint active, 1~100:the priority level for the CV constraints, 101: economic optimization, 111:blending ratio constraints. Visible only when Advanced option is selected. |
| Actual CV Status [t/v] | INACTIVE | The actual status (BAD/ACTIVE/INACTIVE) of CV (Kernel output parameter). Visible only when Advanced option is selected. |
| Remote Target Value [t/v] | 0.0 | CV target value coming from a Real-time Optimizer (RTO).Visible only when Advanced option is selected. |
| Remote Target Remove Flag [t/v] | True | Remove flag (True/False) for remote target value, which is only valid if the remove flag sets to False. Visible only when Advanced option is selected. |
| Remote Target Weight [t/v] | 0.0 | The relative importance among valid CV targets if not all CV targets can be achieved. Visible only when Advanced option is selected. |
| Remote Target Status [t/v] | INACTIVE | The actual status (BAD/ACTIVE/INACTIVE) of CV target (Kernel output parameter). Visible only when Advanced option is selected. |
2016.7.1
