一、頭文件
#include <unistd.h>
二、函數原型
int unlink(const char *pathname);
三、函數介紹
unlink()函數功能即為刪除文件。執行unlink()函數會刪除所給參數指定的文件。
注意：
執行unlink()函數并不一定會真正的刪除文件，它先會檢查文件系統中此文件的連接數是否為
1，如果不是1說明此文件還有其他鏈接對象，因此只對此文件的連接數進行減1操作。若連接數為1，并且在此時沒有任何進程打開該文件，此內容才會真正地被刪除掉。在有進程打開此文件的情況下，則暫時不會刪除，直到所有打開該文件的進程都結束時文件就會被刪除。
返回值：成功返回0，失敗返回 -1
四、代碼示例
#include <unistd.h>
#include <stdio.h>
#include <fcntl.h>
#include <assert.h>
int main(int argc, const char * argv[]) {
int fd = open("test.txt", O_RDWR | O_TRUNC | O_CREAT, 0664);
assert(fd != -1);
if (unlink("test.txt") < 0) {
printf("unlink errpr!\n");
}
char buff[128] = {0};
write(fd, "hello world!", 12);
if (lseek(fd, 0, SEEK_SET) == -1) {
printf("lseek error!\n");
}
read(fd, buff, 12);
printf("%s\n", buff);
return 0;
}
五、運行結果
hello world!
Program ended with exit code: 0
從結果可以得出，在文件打開的情況下unlink()并不會立即刪除，并且對文件依然可以進行讀寫操作，在進程結束之后文件就會被刪除掉！
六、函數說明
UNLINK(2) BSD System Calls Manual UNLINK(2)
NAME
unlink, unlinkat -- remove directory entry
SYNOPSIS
#include <unistd.h>
int
unlink(const char *path);
int
unlinkat(int fd, const char *path, int flag);
DESCRIPTION
The unlink() function removes the link named by path from its direc-
tory and decrements the link count of the file which was referenced
by the link. If that decrement reduces the link count of the file
to zero, and no process has the file open, then all resources asso-
ciated with the file are reclaimed. If one or more process have the
file open when the last link is removed, the link is removed, but
the removal of the file is delayed until all references to it have
been closed.
The unlinkat() system call is equivalent to unlink() or rmdir()
except in the case where path specifies a relative path. In this
case the directory entry to be removed is determined relative to the
directory associated with the file descriptor fd instead of the cur-
rent working directory.
The values for flag are constructed by a bitwise-inclusive OR of
flags from the following list, defined in <fcntl.h>:
AT_REMOVEDIR
Remove the directory entry specified by fd and path as a
directory, not a normal file.
If unlinkat() is passed the special value AT_FDCWD in the fd parame-
ter, the current working directory is used and the behavior is iden-
tical to a call to unlink or rmdir respectively, depending on
whether or not the AT_REMOVEDIR bit is set in flag.
RETURN VALUES
Upon successful completion, a value of 0 is returned. Otherwise, a
value of -1 is returned and errno is set to indicate the error.
ERRORS
The unlink() system call will fail if:
[EACCES] Search permission is denied for a component of
the path prefix.
[EACCES] Write permission is denied on the directory con-
taining the link to be removed.
[EBUSY] The entry to be unlinked is the mount point for a
mounted file system.
[EBUSY] The file named by the path argument cannot be
unlinked because it is being used by the system
or by another process.
[EFAULT] Path points outside the process's allocated
address space.
[EIO] An I/O error occurs while deleting the directory
entry or deallocating the inode.
[ELOOP] Too many symbolic links are encountered in trans-
lating the pathname. This is taken to be indica-
tive of a looping symbolic link.
[ENAMETOOLONG] A component of a pathname exceeds {NAME_MAX}
characters, or an entire path name exceeds
{PATH_MAX} characters (possibly as a result of
expanding a symlink).
[ENOENT] The named file does not exist.
[ENOTDIR] A component of the path prefix is not a direc-
tory.
[EPERM] The named file is a directory and the effective
user ID of the process is not the super-user.
[EPERM] The directory containing the file is marked
sticky, and neither the containing directory nor
the file to be removed are owned by the effective
user ID.
[EROFS] The named file resides on a read-only file sys-
tem.
In addition to the errors returned by the unlink(), the unlinkat()
may fail if:
[EBADF] The path argument does not specify an absolute
path and the fd argument is neither AT_FDCWD nor
a valid file descriptor open for searching.
[ENOTEMPTY] The flag parameter has the AT_REMOVEDIR bit set
and the path argument names a directory that is
not an empty directory, or there are hard links
to the directory other than dot or a single entry
in dot-dot.
[ENOTDIR] The flag parameter has the AT_REMOVEDIR bit set
and path does not name a directory.
[EINVAL] The value of the flag argument is not valid.
[ENOTDIR] The path argument is not an absolute path and fd
is neither AT_FDCWD nor a file descriptor associ-
ated with a directory.
SEE ALSO
close(2), link(2), rmdir(2), symlink(7)
STANDARDS
The unlinkat() system call is expected to conform to POSIX.1-2008 .
HISTORY
An unlink() function call appeared in Version 6 AT&T UNIX. The
unlinkat() system call appeared in OS X 10.10
4th Berkeley Distribution June 4, 1993 4th Berkeley Distribution
