文章來源：http://www.cocoachina.com/cms/wap.php?action=article&id=20101

升級Xcode 9 + iOS 11后，發現原本沒問題的collectionView和tableView像是中了風一樣，頭部刷新UI出現了錯亂。

查閱發現 iOS11棄用了automaticallyAdjustsScrollViewInsets屬性，新增contentInsetAdjustmentBehavior來替代它

關于 contentInsetAdjustmentBehavior

@available(iOS 11.0, *)
public enum UIScrollViewContentInsetAdjustmentBehavior : Int {
case automatic // Similar to .scrollableAxes, but will also adjust the top & bottom contentInset when the scroll view is owned by a view controller with automaticallyAdjustsScrollViewContentInset = YES inside a navigation controller, regardless of whether the scroll view is scrollable case scrollableAxes // Edges for scrollable axes are adjusted (i.e., contentSize.width/height > frame.size.width/height or alwaysBounceHorizontal/Vertical = YES)
case never // contentInset is not adjusted
case always // contentInset is always adjusted by the scroll view's safeAreaInsets
}

UIScrollViewContentInsetAdjustmentBehavior 是一個枚舉類型,值有以下幾種:

-automatic 和scrollableAxes一樣,scrollView會自動計算和適應頂部和底部的內邊距并且在scrollView 不可滾動時,也會設置內邊距.

-scrollableAxes 自動計算內邊距.
-never不計算內邊距
-always 根據safeAreaInsets 計算內邊距

很顯然,我們這里要設置為 never

開始適配

OC 中

        //聲明tableView的位置 添加下面代碼
        if (@available(iOS 11.0, *)) {
            _tableView.contentInsetAdjustmentBehavior = UIScrollViewContentInsetAdjustmentNever;
            _tableView.contentInset = UIEdgeInsetsMake(64, 0, 49, 0);
            _tableView.scrollIndicatorInsets = _tableView.contentInset;
        }

swift 中

        //聲明tableView的位置 添加下面代碼
        if #available(iOS 11.0, *) {
            tableView.contentInsetAdjustmentBehavior = .never
            tableView.contentInset = UIEdgeInsetsMake(64, 0, 49, 0)
            tableView.scrollIndicatorInsets = tableView.contentInset
        }

終于又回歸原來的效果啦