B4.1 任務趨勢

通過單擊如下條目，在應用程序窗格上顯示每個任務（控制器/估算器）的執行狀態：
? ? Common tree（通用） ~ Scheduler（任務） ~ TaskTrend,

■查看配置

Fig. 4.1 Task Trend圖4.1任務趨勢

Fig. 4.2 Setting dialog圖4.2設置對話框

■任務趨勢上的條目說明

表4.1任務趨勢圖上的條目

|條目名 |描述|
| ------------- |:-------------:| -----:|
|Task Information（任務信息）|
|Task Name（任務名稱）| Exasmoc / Exarqe / Exaitg應用名；|
|Execution period（執行周期） |每個應用的執行周期（秒）；|
|Execution trend （執行趨勢）| 顯示任務的執行狀態。0: Stopped；1: Initialization（初始化）；2: On execution（正在執行）；3: On calculation（正在計算）|
|Time scale （時間刻度）| X軸為時間刻度。|
|Setting button （設置按鈕）| 調用設置對話框以指定顯示的配置。|

表4.2設置對話框中的條目

| 條目名 | 描述|
| ------------- |:-------------:| -----:|
| 任務信息|
| Select displaying Task（選擇顯示任務）| 列表上顯示了已注冊的應用。可以選擇繪制哪個任務趨勢。|
| Display setting of Period（顯示周期設置）| 指定是否顯示執行周期。|
| Display setting of Scale（顯示刻度設置）| 指定是否顯示x軸上的時間刻度。|

■操作

單擊task trend（任務趨勢）視圖右側的“Setting（設置）”按鈕時，將顯示設置對話框。通過單擊每個任務的復選框，選擇要顯示在任務趨勢視圖上的任務。默認情況下所有任務都被選中。
當APC HMI關閉時，選中的任務趨勢將被刪除。因此當再次調用APC HMI時，默認設置生效。

B5 控制視圖

Control view（控制視圖）一目了然地顯示了所有控制器及其狀態。它還具有本節所述的操作功能。
通過展開Navigation Pane（導航窗格）的“Control Panel（控制面板）”并單擊“Exasmoc”，將顯示Exasmoc控制面板。
每個應用程序可以從Control Panel（控制面板）初始化，可以執行初始化操作，SMOC文件保存和Debugging（調試）文件輸出等。

Fig. B 5.1 Control view 圖B 5.1控制視圖

? 控制視圖中條目的說明

表B 5.1控制視圖

? 主控制器

|條目| 描述 |操作員模式 |工程師模式|
| ------------- |:-------------:| -----:|
|Main Controller （主控制器）| Exasmoc控制器的唯一位號名（10個字符以內）。| R| R|
|Sub Controller（子控制器）| Exasmoc子控制器的唯一位號名。 |R| R|
|Actual Status（實際狀態）| 當前控制器狀態。| R | R|
|Desired Status（期望狀態）| 在此條目下組合框的幫助下，可以選擇/更改單個控制器的狀態。 點擊組合框，菜單將出現： OFF/STANDBY/CONTROL/OPTIMISE 根據下述描述為控制器選擇一個操作模式。 OFF- 完全沒有計算。 STANDBY（掛起）-(默認) 僅對模型更新執行觀察。計算的控制動作僅用于HMI。不會向過程發送任何操作。 CONTROL（控制）-控制動作被計算并輸出到過程和HMI。 OPTIMISE（優化）-控制動作被計算并輸出到過程和HMI。當用戶選擇了經濟函數時，控制目標還包括經濟優化。 在OPE模式下，用戶不能將狀態更改為“OFF”。事實上，“OFF”不會出現在下拉菜單中。 僅在ENG模式下，用戶能將狀態更改為“OFF”。 當處于“STANDBY（掛起）”模式時，如果模式是“CONTROL”或“OPTIMISE”, 下拉菜單將不顯示“OFF” 。用戶必須首先將狀態更改為“STANDBY”。| R R/W R/W R/W |R R/W R/W R/W|

原文：

B4.1. Task Trend

Execution status of each task (Controller / Estimators) is displayed on the application pane, by clicking as follows:
? Common tree ~ Scheduler ~ TaskTrend,

■ View configuration

■ Description of items on Task Trend

Table 4.1 Items on the Task Trend

|Item Name| Description|
| ------------- |:-------------:| -----:|
|Task Information|
|Task Name | Exasmoc/Exarqe/Exaitg application name.|
|Execution period| Execution period of each application. Second|
|Execution trend | Task execution status is displayed. 0: Stopped；1: Initialization；2: On execution；3: On calculation|
|Time scale | Time scale in X-axis|
|Setting button |Call the setting dialog to specify the display configuration.|

Table 4.2 Items on the Setting Dialog

|Item Name| Description|
| ------------- |:-------------:| -----:|
|Task Information|
|Select displaying Task| Assigned application names are display on the list. It is selectable which task trend is plotted.|
|Display setting of Period| Specifies if execution period is shown or not.|
|Display setting of Scale|Specifies if time scale on X-axis is shown or not.|

■ Operation

On clicking "Setting" button on the right of the task trend view, the setting dialog is shown. Select a task to be displayed on the task tend view by clicking the check box of each task. As default, all tasks are selected.
When the APC HMI is closed, the selection of the task trend is removed. So the default setting becomes effective when APC HMI is called again.

B5. Control View

The Control view shows all the controllers and their status at a glance. It also has operational capability described in this section.
By expanding "Control Panel" of Navigation Pane and clicking "Exasmoc", the Exasmoc control panel is displayed.
Each Application can be initialized from the Control panel, The operations of initialization, SMOC file saving, and Debugging file output, etc. be executed.

? Description of items on Control View

Table B 5.1 Control view

? Main Controller

| Item | Description | Operator mode | Engineer mode|
| ------------- |:-------------:| -----:|
| Main Controller | Exasmoc Controller’s unique Tag Name (10 Characters) | R| R|
| Sub Controller| Exasmoc Sub Controller’s unique Tag Name | R | R|
| Actual Status | Current control status| R| R|
|Desired Status|With the help of Combo box under this item individual controller’s Status can be selected/changed Click Combo box and drop out menu will appear. OFF/STANDBY/CONTROL/OPTIMISE. Select one of the modes for Controller’s action as described below. OFF- No Calculation at all. STANDBY - (Default) Only observation is performed for model updating. Control actions are computed only for HMI purposes; no action is sent to the process. CONTROL - Control actions are computed and output to the process and HMI. OPTIMISE - Control actions are computed and output to the process and HMI The controller objective also includes the economic optimization when an economic function is selected by the user. In OPE mode user cannot change status to “OFF”. In fact “OFF does not appear in pull down menu. In ENG mode user can change status to “OFF” but only when mode is “STANDBY”. If the mode is “CONTROL” or “OPTIMISE”, “OFF” does not appear in pull down menu. User has to change the status to “STANDBY” first. |R R/W R/W R/W |R R/W R/W R/W|

2016.12.31