一. 前期準備

1. 環境：

三臺 ceph node (需要有一塊空盤，沒有掛載，沒有格式化)
系統：centos 7.5 (關閉防火墻，關閉 selinux)

2. 推薦在 ceph node 上安裝 NTP，配置 NTP 對時

sudo yum install ntp ntpdate ntp-doc

關閉 SELinux ; 關閉防火墻(或者開放相應端口)

3. 在所有節點上修改 yum 源

換成阿里 yum 源，并添加 epel 源

cp -a /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.bak
cp -a /etc/yum.repos.d/epel.repo /etc/yum.repos.d/epel.repo.bak
curl -o /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo 
curl -o /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo

添加 ceph yum 源

cat << EOM > /etc/yum.repos.d/ceph.repo
[Ceph]
name=Ceph packages for \$basearch
baseurl=https://mirrors.aliyun.com/ceph/rpm-nautilus/el7/\$basearch
enabled=1
gpgcheck=1
type=rpm-md
gpgkey=https://mirrors.aliyun.com/ceph/keys/release.asc
priority=1

[Ceph-noarch]
name=Ceph noarch packages
baseurl=https://mirrors.aliyun.com/ceph/rpm-nautilus/el7/noarch
enabled=1
gpgcheck=1
type=rpm-md
gpgkey=https://mirrors.aliyun.com/ceph/keys/release.asc
priority=1

[ceph-source]
name=Ceph source packages
baseurl=https://mirrors.aliyun.com/ceph/rpm-nautilus/el7/SRPMS
enabled=1
gpgcheck=1
type=rpm-md
gpgkey=https://mirrors.aliyun.com/ceph/keys/release.asc
priority=1
EOM

3. 給每個 ceph node 和 ceph-deploy admin node 添加用戶 cephdeploy

groupadd cephdeploy -g 1024
useradd cephdeploy -u 1024 -g 1024

賦予 sudo 權限

echo "cephdeploy    ALL=(ALL)       NOPASSWD: ALL" >> /etc/sudoers

4. 給每個 ceph node 和 ceph-deploy admin node 配置 hosts

host 和 hostname 必須一致, 而且 hostname 不能以數字開頭

vim /etc/hosts
10.0.0.2 ceph-node1
10.0.0.3 ceph-node2
10.0.0.4 ceph-node3
10.0.0.5 ceph-deploy

5. 配置 SSH 免密登陸

使用 cephdeploy 用戶在 ceph-deploy admin node 生成 SSH 公鑰

su - cephdeploy
ssh-keygen

在 ceph node 上配置使 ceph-deploy admin node 可以使用 cephdeploy 用戶免密登陸

sed -i 's/#PubkeyAuthentication yes/PubkeyAuthentication yes/g' /etc/ssh/sshd_config
systemctl restart sshd

mkdir /home/cephdeploy/.ssh
chown -R cephdeploy:cephdeploy /home/cephdeploy/.ssh
chown -R cephdeploy:cephdeploy /home/cephdeploy/.ssh/authorized_keys
chmod 600 /home/cephdeploy/.ssh/authorized_keys

6. 在 ceph-deploy admin node 上配置 ~/.ssh/config

切換到 cephdeploy 用戶

vim  .ssh/config 
Host ceph-node1
   Hostname ceph-node1 
   User cephdeploy
   Port 22
Host ceph-node2
   Hostname ceph-node2
   User cephdeploy
   Port 22
Host ceph-node3
   Hostname ceph-node3
   User cephdeploy
   Port 22

修改權限

chmod 600 .ssh/config

7. 在 ceph-deploy admin node 上安裝 ceph-deploy

sudo yum install ceph-deploy -y

8. 在 ceph node 上安裝 ceph

sudo yum -y install ceph ceph-radosgw

二. Ceph 集群

1. 初始化 ceph 集群

在管理節點上，以 cephdeploy 登陸，創建一個目錄，以維護為集群生成的配置文件和密鑰

mkdir my-cluster
cd my-cluster

ceph-deploy new ceph-node1 ceph-node2 ceph-node3

Deploy the initial monitor(s) and gather the keys:

ceph-deploy mon create-initial

Use ceph-deploy to copy the configuration file and admin key to your admin node and your Ceph Nodes so that you can use the ceph CLI without having to specify the monitor address and ceph.client.admin.keyring each time you execute a command

ceph-deploy admin ceph-node1 ceph-node2 ceph-node3

Deploy a manager daemon.

ceph-deploy mgr create ceph-node1 ceph-node2 ceph-node3

Add three OSDs. For the purposes of these instructions, we assume you have an unused disk in each node called /dev/vdb. Be sure that the device is not currently in use and does not contain any important data.

ceph-deploy osd create --data {device} {ceph-node}

For example:

ceph-deploy osd create --data /dev/vdb ceph-node1
ceph-deploy osd create --data /dev/vdb ceph-node2
ceph-deploy osd create --data /dev/vdb ceph-node3

ceph fs

ceph-deploy mds create ceph-node1 ceph-node2 ceph-node3

ceph osd pool create cephfs_data 32 32
ceph osd pool create cephfs_metadata 32 32
ceph fs new mycephfs cephfs_metadata cephfs_data

cat /etc/ceph/ceph.client.admin.keyring
mount.ceph ceph-node1:6789:/ /mnt/ -o name=admin,secret="xxxxx"

ceph fs authorize cephfs client.testuser /testdir rw
mount.ceph 10.205.117.101:6789,10.205.117.102:6789,10.205.117.103:6789,10.205.117.104:6789:/testdir /mnt/ -o name=testuser,secret="pass"

部署RGW實例

ceph-deploy rgw  create ceph-node1 ceph-node2 ceph-node3 ceph-node4

快存儲

rbd create foo --size 4096 --image-feature layering -m 10.205.205.41,10.205.205.43,10.205.207.171 -k /etc/ceph/ceph.client.admin.keyring -p rbdpool01

sudo rbd map foo --name client.admin -m 10.205.205.41,10.205.205.43,10.205.207.171 -k /etc/ceph/ceph.client.admin.keyring -p rbdpool01

mkfs.ext4 -m0 /dev/rbd/rbdpool01/foo

mkdir /mnt/ceph-block-device
mount /dev/rbd/rbdpool01/foo /mnt/ceph-block-device

Ceph Dashboard

官方文檔：https://docs.ceph.com/docs/master/mgr/dashboard/

yum -y install ceph-mgr-dashboard
ceph config set mgr mgr/dashboard/ssl false
ceph mgr module enable dashboard
ceph dashboard ac-user-create <username> <password> administrator

1. 開啟儀表板 Object Gateway 管理功能

radosgw-admin user create --uid=CephDashboard --display-name=CephDashboard --system

radosgw-admin user info --uid=<user_id>

ceph dashboard set-rgw-api-access-key <access_key>
ceph dashboard set-rgw-api-secret-key <secret_key>

系統調優

echo "net.ipv4.ip_local_port_range = 1024     65535" >> /etc/sysctl.conf

參考文檔：
https://docs.ceph.com/docs/master/start/quick-ceph-deploy/
李航：分布式存儲 Ceph 介紹及原理架構分享