iOS UIViewController 和 Android Activity 生命周期對比

iOS和Android大體上的邏輯是相同的，細微上會有一些差別；

iOS UIViewController

• - (instancetype)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil
• - (instancetype)init
• - (void)loadView;
• - (void)viewDidLoad;
• - (void)viewWillAppear:(BOOL)animated;
• - (void)viewDidAppear:(BOOL)animated;
• - (void)viewWillDisappear:(BOOL)animated;
• - (void)viewDidDisappear:(BOOL)animated;
• - (void)dealloc

打印如下:

-[MyViewController initWithNibName:bundle:]
-[MyViewController init]
-[MyViewController loadView]
-[MyViewController viewDidLoad]
-[MyViewController viewWillAppear:]
-[MyViewController viewDidAppear:]
-[MyViewController viewWillDisappear:]
-[MyViewController viewDidDisappear:]
-[MyViewController dealloc]

present方式

下面演示了從源控制器 OneViewController present 到目標控制器 MyViewController ，再dismiss返回 OneViewController的過程

OneViewController 加載完成顯示順序:

-[OneViewController initWithNibName:bundle:]
-[OneViewController init]
-[OneViewController loadView]
-[OneViewController viewDidLoad]
-[OneViewController viewWillAppear:]
-[OneViewController viewDidAppear:]

從 OneViewController 通過 present 方式到 MyViewController 過程如下:

-[MyViewController initWithNibName:bundle:]
-[MyViewController init]
-[MyViewController loadView]
-[MyViewController viewDidLoad]
-[OneViewController viewWillDisappear:]
-[MyViewController viewWillAppear:]
-[MyViewController viewDidAppear:]
-[OneViewController viewDidDisappear:]

可以看到需要等到目標控制器完成 viewDidLoad 方法（即加載 view 完成），源控制器才會 Disappear，目標控制器 Appear

目標控制器 dismiss 過程如下，即從目標控制器返回到源控制器:

-[MyViewController viewWillDisappear:]
-[OneViewController viewWillAppear:]
-[OneViewController viewDidAppear:]
-[MyViewController viewDidDisappear:]
-[MyViewController dealloc]

可以看到，目標控制器 WillDisappear ，等到源控制器 viewDidAppear 了，目標控制器才會真正的 DidDisappear 和銷毀 dealloc

小結

• 同一個時刻，只有一個控制器 viewDidAppear ，只有一個控制器 viewDidAppear 另外一個控制器才會 viewDidDisappear
• 一個控制器 A 的 viewWillDisappear 作為一個信號，另外一個控制器 B 才會 viewWillAppear 和 viewDidAppear，控制器B viewDidAppear 作為信號，控制器 A 才會 viewDidDisappear (可能還有 dealloc)

-[A viewWillDisappear:]
-[B viewWillAppear:]
-[B viewDidAppear:]
-[A viewDidDisappear:]
-[A dealloc]

navigation方式

下面演示了從源控制器 OneViewController 到目標控制器 MyViewController ，再返回 ViewController的過程

OneViewController控制器加載順序: 和 present方式相同

-[OneViewController initWithNibName:bundle:]
-[OneViewController init]
-[OneViewController loadView]
-[OneViewController viewDidLoad]
-[OneViewController viewWillAppear:]
-[OneViewController viewDidAppear:]

從 OneViewController push 到 MyViewController

-[MyViewController initWithNibName:bundle:]
-[MyViewController init]
-[MyViewController loadView]
-[MyViewController viewDidLoad]
-[OneViewController viewWillDisappear:]
-[MyViewController viewWillAppear:]
-[OneViewController viewDidDisappear:]
-[MyViewController viewDidAppear:]

從 MyViewController pop 到 OneViewController

-[MyViewController viewWillDisappear:]
-[OneViewController viewWillAppear:]
-[MyViewController viewDidDisappear:]
-[OneViewController viewDidAppear:]
-[MyViewController dealloc]

對比:

UIViewController生命周期對比.png

總結：

• 控制器A 切換到 到 控制器B 的大致順序?yàn)?
  • 1、[A viewWillDisappear]
  • 2、[B viewWillAppear]
  • 3、[B viewDidAppear]
  • 4、[A viewDidDisappear]
• 如果是 present/dismiss 方式，順序?yàn)?1234
• 如果是 push/pop 方式，順序?yàn)?code>1243

1、需要一個控制器 viewWillDisappear 作為信號，另外一個控制器開會開始處理；
2、控制器A到控制器B，

• present/dismiss方式，需要 B viewDidAppear，然后A viewDidDisappear
• push/pop方式，需要 A viewDidDisappear，然后 B viewDidAppear

Android Activity

參考官方圖示

[圖片上傳失敗...(image-6cfcaf-1536829354686)]

activity 基本的四種狀態

• resumed : If an activity is in the foreground of the screen (at the top of the stack), it is active or running.
• paused: If an activity has lost focus but is still visible (that is, a new non-full-sized or transparent activity has focus on top of your activity), it is paused. A paused activity is completely alive (it maintains all state and member information and remains attached to the window manager), but can be killed by the system in extreme low memory situations.
• stopped: If an activity is completely obscured by another activity, it is stopped. It still retains all state and member information, however, it is no longer visible to the user so its window is hidden and it will often be killed by the system when memory is needed elsewhere.
• If an activity is paused or stopped, the system can drop the activity from memory by either asking it to finish, or simply killing its process. When it is displayed again to the user, it must be completely restarted and restored to its previous state.

下面為一開始進入MainActivity，跳轉到 LoginActivity，又返回到 MainActivity

// 1、MainActivity 創建
E/MainActivity: onCreate -- 
E/MainActivity: onStart -- 
E/MainActivity: onResume -- 

// 2、MainActivity 跳轉到 LoginActivity
E/MainActivity: onPause -- 
E/LoginActivity: onCreate -- 
E/LoginActivity: onStart -- 
E/LoginActivity: onResume -- 
E/MainActivity: onStop -- 

// 3、LoginActivity 返回到 MainActivity
E/LoginActivity: onPause -- 
E/MainActivity: onRestart --
E/MainActivity: onStart -- 
E/MainActivity: onResume -- 
E/LoginActivity: onStop -- 
E/LoginActivity: onDestroy -- 

• onCreate() : activity 第一次被創建的時候，一般用作創建views、綁定數據、獲取Bundle里面的數據等（頁面?zhèn)鬟f的數據）
  • 下一步: onStart()
• onRestart() : activity被stopped，然后又需要重新 onStart()，看上面的例子
  • 下一步: onStart()
• onStart() : activity 變的對用戶可見visible
  • 下一步:
    • onResume() : activity 進入前臺 foreground
    • onStop() : activity 被隱藏了 hidden，不可見了 (iOS沒有這個邏輯?)
• onResume() : activity 在 activity stack的最上面，可以和用戶進行交互了；
  • 下一步 onPause()
• onPause() : 將要跳轉到另外一個activity，包含跳轉和返回
  • 下一步:
    • onResume() : 返回
    • onStop() : activity 被隱藏了 hidden，不可見了 (iOS沒有這個邏輯?)
• onStop() : activity 對用戶不可見了；1、開啟了一個新的activity覆蓋在當前的activity上面；2、從當前的activity返回到上一個activity
  • 下一步:
    • onRestart() : 類似 2 情況的 上一個activity
    • onDestroy() : 類似 2 情況的 當前的activity
• onDestroy() : activity 被銷毀了，執行 finish()

小結

頁面A 跳轉到 頁面B

• iOS : 頁面B 會走到 view加載完成方法 (viewDidLoad)，然后頁面A才會將要消失(viewWillDisappear)
• Android : 然后頁面A才會將要消失(onPause)，然后才會走頁面B的方法

頁面B 跳轉到 頁面A類似

Android類似iOS的present方式跳轉頁面: 都是目標控制器已經顯示了，源控制器才會已經消失了；

Android比iOS多了一個onRestart()方法，即重新啟動