今天花了很多時間整理這個包的繪圖函數，不得不說這個基于ggplot2的包，是真的友好，很適合初學者?？赡軐?duì)于熟悉ggplot2的人來說，ggpubr的存在有些多余，但這并不妨礙它成為一個優秀的R包。

接下來我主要依據變量類型，對這個包的十來種函數，近30種圖形進行展示，幾乎涵蓋了平?？吹降拇蠖鄶?shù)圖。這篇推文也很可能成為你見過的最詳細的ggpubr中文教程。
公眾號后臺回復20210330，獲取今天的代碼和圖形示例pdf。

install.packages("ggpubr")
library(ggpubr)

1. 單變量——連續型

1.1 密度圖

#創建數據框
set.seed(0330)
mydata = data.frame(
  group = rep(c("A", "B","C","D"), each=200),
  value = c(rnorm(200, mean = 2), rnorm(200, 6),rnorm(200,2,4),rnorm(200,6,4))
)

ggdensity(mydata, x = "value", y="..density..", #或者"..count.."，默認為"..density.."
          fill = "lightgray",
          add = "mean", #或者"median",
          rug = TRUE #在圖形下方添加密度線
          )
ggsave("density1.pdf",width = 10,height = 10,units = "cm")

分組繪制

ggdensity(mydata, x = "value",
          color = "group", fill="group", #分組
          palette = "Dark2",#或者"aaas"這種ggsci包的配色形式,或者"#00AFBB"這種編碼形式
          add = "mean",
          rug = TRUE,
          alpha=0.2, #調整透明度
          xlab=F,ylab = "Density",
          facet.by="group", #分面
          panel.labs=list(group = c("1", "2", "3", "4")), #修改每個panel的名字
          title="density plot",
          ggtheme=theme_bw() #可以是ggplot2中的主題類型
)
ggsave("density2.pdf",width = 13,height = 12,units = "cm")

1.2 密度圖疊加正態分布

set.seed(0330)
mydata = data.frame(
  group = rep(c("A", "B"), each=200),
  value = c(rnorm(200, 2), rnorm(200, 6, 4))
)

ggdensity(mydata, x = "value", fill = "red") +
  stat_overlay_normal_density(color = "red", linetype = "dashed")+
  scale_x_continuous(limits = c(-5,20))
ggsave("density3.pdf",width = 10,height = 10,units = "cm")

分組繪制

ggdensity(mydata, x = "value", fill = "group") +
  stat_overlay_normal_density(aes(color=group), linetype = "dashed")+
  scale_x_continuous(limits = c(-5,20))
ggsave("density4.pdf",width = 10,height = 10,units = "cm")

分組+分面

ggdensity(mydata, x = "value", fill = "group", facet.by = "group") +
  stat_overlay_normal_density(aes(color=group), linetype = "dashed")+
  scale_x_continuous(limits = c(-5,20))
ggsave("density5.pdf",width = 16,height = 10,units = "cm")

1.3 直方圖

gghistogram(mydata, x = "value", fill = "lightgray",
            add = "mean", rug = TRUE)
ggsave("hist1.pdf",width = 10,height = 10,units = "cm")

分組繪制

gghistogram(mydata, x = "value", fill = "group",
            add = "mean", rug = TRUE,
            palette = c("#00AFBB", "#E7B800"))
ggsave("hist2.pdf",width = 10,height = 10,units = "cm")

添加核密度圖

gghistogram(mydata, x = "value", fill = "group",
            rug = TRUE,
            palette = c("#00AFBB", "#E7B800"),
            add_density = TRUE)
ggsave("hist3.pdf",width = 10,height = 10,units = "cm")

2. 雙變量——x離散，y連續

2.1 箱型圖

library(patchwork)
set.seed(0330)
mydata = data.frame(
  group = rep(c("A", "B"), each=100),
  group2 = rep(c("g1","g2","g1","g2"),each=50),
  value = c(rnorm(100, 2), rnorm(100, 6, 4))
)

#下面的加號表示拼接圖形
ggboxplot(mydata, x = "group", y = "value", width = 0.8)+
ggboxplot(mydata, x = "group", y = "value", width = 0.8, orientation = "horizontal")+
ggboxplot(mydata, x = "group", y = "value", width = 0.8, notch = TRUE,order = c("B","A"))+
ggboxplot(mydata, x = "group", y = "value", width = 0.8, select = c("A"))
ggsave("box1.pdf",width = 10,height = 10,units = "cm")

orientation調整圖形方向；notch添加缺口；order調整順序；select選擇特定的水平來畫圖

ggboxplot(mydata, x = "group", y = "value", width = 0.8, add = "jitter",add.params=list(color = "lightblue",size=1, shape = 17))+
ggboxplot(mydata, x = "group", y = "value", width = 0.8, add = "dotplot",add.params=list(color = "lightblue",size=0.5))
ggsave("box2.pdf",width = 16,height = 10,units = "cm")

上面的add添加額外圖形
add.params對附加圖形的參數進行調整，shape表示點的形狀，可以參加下圖

內部分組

ggboxplot(mydata, x = "group", y = "value", width = 0.6, color = "black",fill="group2",palette = c("#00AFBB", "#E7B800"),
          xlab = F, #不顯示x軸的label
          bxp.errorbar=T,bxp.errorbar.width=0.4, #添加errorbar
          size=1, #箱型圖邊線的粗細
          outlier.shape=NA, #不顯示outlier
          legend = "right") #圖例放右邊
ggsave("box3.pdf",width = 10,height = 10,units = "cm")

2.1.1 箱型圖添加配對連線

可以接受兩種數據框

mydata2=mydata
mydata2$group2=NULL
head(mydata2)
# group    value
# 1     A 3.551687
# 2     A 3.664068
# 3     A 2.194454
# 4     A 2.569605
# 5     A 2.579997
# 6     A 1.837967
ggpaired(mydata2, x = "group", y = "value",
         color = "group", line.color = "gray", line.size = 0.4,
         palette = "npg")
                 
mydata2$id=rep(1:100,2)
mydata2=mydata2%>%reshape2::dcast(id~group)
head(mydata2)
# id        A         B
# 1  1 3.551687  4.720074
# 2  2 3.664068  7.821049
# 3  3 2.194454  8.956841
# 4  4 2.569605 -4.450063
# 5  5 2.579997  7.568216
# 6  6 1.837967  5.133688
ggpaired(mydata2, cond1 = "A", cond2 = "B",
         color = "condition", line.color = "gray", line.size = 0.4,
         palette = "npg")
ggsave("box4.pdf",width = 10,height = 10,units = "cm")

上面兩種數據框得到的圖是一模一樣的

2.1.2 添加p值

一般用法

ggboxplot(mydata, x = "group", y = "value", width = 0.8, 
          add = "dotplot",add.params=list(color = "lightblue",size=0.5))+
  stat_compare_means(method = "t.test")
ggsave("box5.pdf",width = 10,height = 10,units = "cm")

成對數據

ggpaired(mydata2, cond1 = "A", cond2 = "B",
         color = "condition", line.color = "gray", line.size = 0.4,
         palette = "npg")+
  stat_compare_means(paired = TRUE)
ggsave("box6.pdf",width = 10,height = 10,units = "cm")

多于兩個組時，定義想檢驗的配對

my_comparisons <- list( c("0.5", "1"), c("1", "2"), c("0.5", "2") )
ggboxplot(ToothGrowth, x = "dose", y = "len",
          color = "dose", palette = "npg")+
  #兩兩比較的p值
  stat_compare_means(comparisons = my_comparisons, label.y = c(29, 35, 40))+
  #整體的p值
  stat_compare_means(label.y = 45)
ggsave("box7.pdf",width = 10,height = 10,units = "cm")

固定某一組，其他組與其比較

ggboxplot(ToothGrowth, x = "dose", y = "len",
          color = "dose", palette = "npg")+
  # 整體的p值
  stat_compare_means(method = "anova", label.y = 40)+ 
  #label中用點表示顯著性
  stat_compare_means(aes(label = ..p.signif..),
                     method = "t.test", ref.group = "0.5")
ggsave("box8.pdf",width = 10,height = 10,units = "cm")

分組/分面之后再做比較

ggboxplot(ToothGrowth, x = "supp", y = "len",
          color = "supp", palette = "npg",
          add = "jitter",
          facet.by = "dose")+
  #label中去掉檢驗方法
  stat_compare_means(aes(label = paste0("p = ", ..p.format..)))
ggsave("box9.pdf",width = 10,height = 10,units = "cm")

2.2 小提琴圖

整體上參數選項和箱型圖差不多

ggviolin(mydata, x = "group", y = "value", fill = "group",
         palette = c("#00AFBB", "#E7B800"),
         add = "boxplot", add.params = list(fill = "white"))+
ggviolin(mydata, x = "group", y = "value", color = "group2", #內部分組
         palette = c("#00AFBB", "#E7B800"), 
         add = "boxplot")
ggsave("violin1.pdf",width = 16,height = 10,units = "cm")

2.3 柱形圖

2.3.1 數據已經統計好

df1 <- data.frame(group=c("A", "B", "C"),
                 len=c(6, 10, 14))
ggbarplot(df1, "group", "len",
          fill = "group", color = "group",
          palette = c("#00AFBB", "#E7B800", "#FC4E07"),
          label = TRUE, lab.pos = "in", lab.col = "white")
ggsave("bar1.pdf",width = 10,height = 10,units = "cm")

2.3.2 數據沒有統計好

(需要函數幫你計算，比如組內求和，一般反映在縱坐標上，這是函數幫你算的)

df2 <- data.frame(group=rep(c("A", "B", "C"),2),
                  group2=rep(c("1", "2"), each=3),
                  len=c(6, 15, 3, 4, 10, 5))
# group group2 len
# 1     A      1   6
# 2     B      1  15
# 3     C      1   3
# 4     A      2   4
# 5     B      2  10
# 6     C      2   5
ggbarplot(df2, "group", "len",
          fill = "group2", color = "group2", palette = "Paired",
          label = TRUE, lab.col = "white", lab.pos = "in")+
ggbarplot(df2, "group", "len",
          fill = "group2", color = "group2", palette = "Paired",
          label = TRUE,
          position = position_dodge(0.9)) #范圍0-1，表示柱子之間的錯開程度
ggsave("bar2.pdf",width = 16,height = 10,units = "cm")

2.3.3 添加誤差棒

df3 <- mydata
#這時累加
ggbarplot(df3, x = "group", y = "value")+
#這時求均值
ggbarplot(df3, x = "group", y = "value",
          add = "mean")+
#添加誤差棒,error.plot選擇展示形式，默認上下都展示
ggbarplot(df3, x = "group", y = "value",
          add = "mean_se",
          error.plot = "upper_errorbar")+
#內部分組
ggbarplot(df3, x = "group", y = "value", color = "group2", 
          add = "mean_se", palette = c("#00AFBB", "#E7B800"),
          position = position_dodge())
ggsave("bar3.pdf",width = 16,height = 16,units = "cm")

2.4 連線圖

#數據計算好，可以直接用
ggline(df1, x = "group", y = "len")+
#內部分組，點線的形狀和顏色均不同
ggline(df2, x = "group", y = "len", 
       linetype = "group2", shape = "group2",#點的形狀
       color = "group2", palette = c("#00AFBB", "#E7B800"))+
#添加點和誤差棒
ggline(df3, x = "group", y = "value",
       add = c("mean_se","dotplot"),add.params = list(size=0.5),
       color = "steelblue")+
#內部分組，線的顏色不一樣
ggline(df3, x = "group", y = "value", color = "group2",
       add = "mean_se", palette = c("#00AFBB", "#E7B800"))
ggsave("line1.pdf",width = 16,height = 16,units = "cm")

2.5 餅圖

df1$ratio=paste(df1$group,"(",round(df1$len / sum(df1$len),3) * 100,"%)",sep = "")
ggpie(df1, "len", label = "ratio",
      fill = "group", color = "white",
      palette = c("#00AFBB", "#E7B800", "#FC4E07"))+
ggpie(df1, "len", label = "ratio",
      lab.pos = "in", lab.font = "white",
      fill = "group", color = "white",
      palette = c("#00AFBB", "#E7B800", "#FC4E07"))
ggsave("pie1.pdf",width = 16,height = 10,units = "cm")

label添加文本注釋；
color是扇形的邊線，lab.pos調整文本的位置，lab.font調整文本字體顏色

2.6 圓環圖

ggdonutchart(df1, "len", label = "ratio",
             lab.pos = "in", lab.font = "white",
             fill = "group", color = "white",
             palette = c("#00AFBB", "#E7B800", "#FC4E07"))
ggsave("donut1.pdf",width = 10,height = 10,units = "cm")

2.7 克利夫蘭點圖

ggdotchart(df2, x = "group", y = "len",
           color = "group2", size = 3,
           add = "segment",
           add.params = list(color = "lightgray", size = 1.5),
           position = position_dodge(0.5),
           palette = "jco",
           ggtheme = theme_pubclean())
ggsave("Clevelands_Dot1.pdf",width = 10,height = 10,units = "cm")

3. 雙變量——x, y都連續

3.1 散點圖添加回歸線，相關系數

df4=mtcars
df4$cyl=as.factor(df4$cyl)
ggscatter(df4, x = "wt", y = "mpg",
          color = "black", size = 3, # 點的顏色，大小
          add = "reg.line",  # 添加回歸線
          add.params = list(color = "blue", fill = "lightgray"), # 回歸線的調整
          conf.int = TRUE, # 回歸線的置信區間
          cor.coef = TRUE, # 添加相關系數
          cor.coeff.args = list(method = "pearson", label.x = 3, label.sep = "\n")#相關系數的調整
)

3.2 分組計算相關系數

ggscatter(df4, x = "wt", y = "mpg",
          color = "cyl", palette = "jco",
          add = "reg.line", conf.int = TRUE)+
  stat_cor(aes(color = cyl), label.x = 3)

3.3 局部回歸

ggscatter(df4, x = "wt", y = "mpg",
          add = "loess", conf.int = TRUE)

3.4 添加分組橢圓，均值點，以及輻射線

ggscatter(df4, x = "wt", y = "mpg",
          color = "cyl", shape = "cyl",
          palette = c("#00AFBB", "#E7B800", "#FC4E07"),
          ellipse = TRUE, mean.point = TRUE,
          star.plot = TRUE)

3.5 添加文本注釋

df4$name <- rownames(df4)
ggscatter(df4, x = "wt", y = "mpg",
          color = "cyl", palette = c("#00AFBB", "#E7B800", "#FC4E07"),
          label = "name", repel = TRUE)+plot_layout(widths = c(1,2))

3.6 散點圖邊緣添加密度圖/箱型圖

ggscatterhist(
  iris, x = "Sepal.Length", y = "Sepal.Width",
  color = "Species", size = 3, alpha = 0.6,
  palette = c("#00AFBB", "#E7B800", "#FC4E07"),
  margin.params = list(fill = "Species", color = "black", size = 0.2)
)

ggscatterhist(
  iris, x = "Sepal.Length", y = "Sepal.Width",
  color = "Species", size = 3, alpha = 0.6,
  palette = c("#00AFBB", "#E7B800", "#FC4E07"),
  margin.plot = "boxplot",
  ggtheme = theme_bw()
)

感謝你能讀到這里，有任何疑問歡迎后臺留言。

因水平有限，有錯誤的地方，歡迎批評指正！