SmartConfig_Using_Blu

#include "FS.h"

#include "esp_system.h"

#include <esp_wifi.h>

#include <string.h>

#include <WiFi.h>

#include <Preferences.h>? // WiFi storage

const? char* rssiSSID;? ? ? // NO MORE hard coded set AP, all SmartConfig

const? char* password;

String PrefSSID, PrefPassword;? // used by preferences storage

int? WFstatus;

int UpCount = 0;

int32_t rssi;? ? ? ? ? // store WiFi signal strength here

String getSsid;

String getPass;

String? MAC;

// SSID storage

Preferences preferences;? // declare class object

// END SSID storage

void setup() {

? Serial.begin(115200);

? Serial.printf("\tWiFi Setup -- \n"? );

? wifiInit();? ? ? // get WiFi connected

? IP_info();

? MAC = getMacAddress();

? delay(2000);

} //? END setup()

void loop() {

? if (WiFi.status() == WL_CONNECTED) {

? ? // ANY MAIN LOOP CODE HERE

? } else {

? ? //? wifi down start LED flasher here

? ? WFstatus = getWifiStatus( WFstatus );

? ? WiFi.begin( PrefSSID.c_str() , PrefPassword.c_str() );

? ? int WLcount = 0;

? ? while (WiFi.status() != WL_CONNECTED && WLcount < 20 ) {

? ? ? delay( 100 );

? ? ? Serial.printf("!");

? ? ? if (UpCount >= 60) {

? ? ? ? // keep from scrolling sideways forever

? ? ? ? UpCount = 0;

? ? ? ? Serial.printf("\n");

? ? ? }

? ? ? ++UpCount;

? ? ? ++WLcount;

? ? }

? ? if ( getWifiStatus( WFstatus ) == 3 ) {

? ? ? // wifi returns

? ? ? // stop LED flasher, wifi going up

? ? }

? ? delay( 1000 );

? }

}

void wifiInit() {

? WiFi.mode(WIFI_AP_STA);? // required to read NVR before WiFi.begin()

? // load credentials from NVR, a little RTOS code here

? wifi_config_t conf;

? esp_wifi_get_config(WIFI_IF_STA, &conf);? // load wifi settings to struct comf

? rssiSSID = reinterpret_cast<const char*>(conf.sta.ssid);

? password = reinterpret_cast<const char*>(conf.sta.password);

? Serial.printf( "%s\n", rssiSSID );

? Serial.printf( "%s\n", password );

? // Open Preferences with "wifi" namespace. Namespace is limited to 15 chars

? preferences.begin("wifi", false);

? PrefSSID? ? ? ? ? =? preferences.getString("ssid", "none");? ? ? //NVS key ssid

? PrefPassword? =? preferences.getString("password", "none");? //NVS key password

? preferences.end();

? // keep from rewriting flash if not needed

? if ( !checkPrefsStore() )? ? // see is NV and Prefs are the same

? { // not the same, setup with SmartConfig

? ? if ( PrefSSID == "none" ) // New...setup wifi

? ? {

? ? ? initSmartConfig();

? ? ? delay( 3000);

? ? ? ESP.restart();? // reboot with wifi configured

? ? }

? }

? // I flash LEDs while connecting here

? WiFi.begin( PrefSSID.c_str() , PrefPassword.c_str() );

? int WLcount = 0;

? while (WiFi.status() != WL_CONNECTED && WLcount < 200 ) // can take > 100 loops depending on router settings

? {

? ? delay( 100 );

? ? Serial.printf(".");

? ? ++WLcount;

? }

? delay( 3000 );

? //? stop the led flasher here

}? // END wifiInit()

// match WiFi IDs in NVS to Pref store,? assumes WiFi.mode(WIFI_AP_STA);? was executed

bool checkPrefsStore() {

? bool val = false;

? String NVssid, NVpass, prefssid, prefpass;

? NVssid = getSsidPass( "ssid" );

? NVpass = getSsidPass( "pass" );

? // Open Preferences with my-app namespace. Namespace name is limited to 15 chars

? preferences.begin("wifi", false);

? prefssid? =? preferences.getString("ssid", "none");? ? //NVS key ssid

? prefpass? =? preferences.getString("password", "none"); //NVS key password

? preferences.end();

? if ( NVssid.equals(prefssid) && NVpass.equals(prefpass) )

? {

? ? val = true;

? }

? return val;

}

// optionally call this function any way you want in your own code

// to remap WiFi to another AP using SmartConfig mode.? Button, condition etc..

void initSmartConfig()

{

? // start LED flasher

? int loopCounter = 0;

? WiFi.mode( WIFI_AP_STA );? ? ? //Init WiFi, start SmartConfig

? Serial.printf( "Entering SmartConfig\n" );

? WiFi.beginSmartConfig();

? while (!WiFi.smartConfigDone())

? {

? ? // flash led to indicate not configured

? ? Serial.printf( "." );

? ? if ( loopCounter >= 40 ) // keep from scrolling sideways forever

? ? {

? ? ? loopCounter = 0;

? ? ? Serial.printf( "\n" );

? ? }

? ? delay(600);

? ? ++loopCounter;

? }

? loopCounter = 0;

? // stopped flasher here

? Serial.printf("\nSmartConfig received.\n Waiting for WiFi\n\n");

? delay(2000 );

? while ( WiFi.status() != WL_CONNECTED )? ? // check till connected

? {

? ? delay(500);

? }

? IP_info();? // connected lets see IP info

? preferences.begin("wifi", false);? ? ? // put it in storage

? preferences.putString( "ssid"? ? ? ? , getSsid);

? preferences.putString( "password", getPass);

? preferences.end();

? delay(300);

}? // END SmartConfig()

void IP_info()

{

? getSsid = WiFi.SSID();

? getPass = WiFi.psk();

? rssi = getRSSI(? rssiSSID );

? WFstatus = getWifiStatus( WFstatus );

? MAC = getMacAddress();

? Serial.printf( "\n\n\tSSID\t%s, ", getSsid.c_str() );

? Serial.print( rssi);? Serial.printf(" dBm\n" );? // printf??

? Serial.printf( "\tPass:\t %s\n", getPass.c_str() );

? Serial.print( "\n\n\tIP address:\t" );? Serial.print(WiFi.localIP() );

? Serial.print( " / " );

? Serial.println( WiFi.subnetMask() );

? Serial.print( "\tGateway IP:\t" );? Serial.println( WiFi.gatewayIP() );

? Serial.print( "\t1st DNS:\t" );? ? Serial.println( WiFi.dnsIP() );

? Serial.printf( "\tMAC:\t\t%s\n", MAC.c_str() );

}

int getWifiStatus( int WiFiStatus? )

{

? WiFiStatus = WiFi.status();

? Serial.printf("\tStatus %d",? WiFiStatus );

? switch ( WiFiStatus )

? {

? ? case WL_IDLE_STATUS :? ? ? ? ? ? ? ? ? ? ? ? // WL_IDLE_STATUS? ? = 0,

? ? ? Serial.printf(", WiFi IDLE \n");

? ? ? break;

? ? case WL_NO_SSID_AVAIL:? ? ? ? ? ? ? ? ? ? ? ? // WL_NO_SSID_AVAIL? = 1,

? ? ? Serial.printf(", NO SSID AVAIL \n");

? ? ? break;

? ? case WL_SCAN_COMPLETED:? ? ? ? ? ? ? ? ? ? ? // WL_SCAN_COMPLETED? = 2,

? ? ? Serial.printf(", WiFi SCAN_COMPLETED \n");

? ? ? break;

? ? case WL_CONNECTED:? ? ? ? ? ? ? ? ? ? ? ? ? ? // WL_CONNECTED? ? ? = 3,

? ? ? Serial.printf(", WiFi CONNECTED \n");

? ? ? break;

? ? case WL_CONNECT_FAILED:? ? ? ? ? ? ? ? ? ? ? // WL_CONNECT_FAILED? = 4,

? ? ? Serial.printf(", WiFi WL_CONNECT FAILED\n");

? ? ? break;

? ? case WL_CONNECTION_LOST:? ? ? ? ? ? ? ? ? ? ? // WL_CONNECTION_LOST = 5,

? ? ? Serial.printf(", WiFi CONNECTION LOST\n");

? ? ? WiFi.persistent(false);? ? ? ? ? ? ? ? // don't write FLASH

? ? ? break;

? ? case WL_DISCONNECTED:? ? ? ? ? ? ? ? ? ? ? ? // WL_DISCONNECTED? ? = 6

? ? ? Serial.printf(", WiFi DISCONNECTED ==\n");

? ? ? WiFi.persistent(false);? ? ? ? ? ? ? ? // don't write FLASH when reconnecting

? ? ? break;

? }

? return WiFiStatus;

}

// END getWifiStatus()

// Get the station interface MAC address.

// @return String MAC

String getMacAddress(void)

{

? WiFi.mode(WIFI_AP_STA);? ? ? ? ? ? ? ? ? ? // required to read NVR before WiFi.begin()

? uint8_t baseMac[6];

? esp_read_mac( baseMac, ESP_MAC_WIFI_STA ); // Get MAC address for WiFi station

? char macStr[18] = { 0 };

? sprintf(macStr, "%02X:%02X:%02X:%02X:%02X:%02X", baseMac[0], baseMac[1], baseMac[2], baseMac[3], baseMac[4], baseMac[5]);

? return String(macStr);

}

// END getMacAddress()

// Return RSSI or 0 if target SSID not found

// const char* SSID = "YOUR_SSID";? // declare in GLOBAL space

// call:? int32_t rssi = getRSSI( SSID );

int32_t getRSSI( const char* target_ssid )

{

? byte available_networks = WiFi.scanNetworks();

? for (int network = 0; network < available_networks; network++)

? {

? ? if ( strcmp(? WiFi.SSID( network).c_str(), target_ssid ) == 0)

? ? {

? ? ? return WiFi.RSSI( network );

? ? }

? }

? return 0;

} //? END? getRSSI()

// Requires; #include <esp_wifi.h>

// Returns String NONE, ssid or pass arcording to request

// ie String var = getSsidPass( "pass" );

String getSsidPass( String s )

{

? String val = "NONE";? // return "NONE" if wrong key sent

? s.toUpperCase();

? if ( s.compareTo("SSID") == 0 )

? {

? ? wifi_config_t conf;

? ? esp_wifi_get_config( WIFI_IF_STA, &conf );

? ? val = String( reinterpret_cast<const char*>(conf.sta.ssid) );

? }

? if ( s.compareTo("PASS") == 0 )

? {

? ? wifi_config_t conf;

? ? esp_wifi_get_config( WIFI_IF_STA, &conf );

? ? val = String( reinterpret_cast<const char*>(conf.sta.password) );

? }

? return val;

}

?著作權歸作者所有,轉載或內容合作請聯系作者
【社區內容提示】社區部分內容疑似由AI輔助生成,瀏覽時請結合常識與多方信息審慎甄別。
平臺聲明:文章內容(如有圖片或視頻亦包括在內)由作者上傳并發布,文章內容僅代表作者本人觀點,簡書系信息發布平臺,僅提供信息存儲服務。

相關閱讀更多精彩內容

友情鏈接更多精彩內容