B3.5 通用規格
? 數據和消息區的背景顏色
白色：表示相同行中的相應值為ACTIVE；
灰色：表示相同行中的相應值為INACTIVE。
? 數據不出現
當顯示數據不存在時，數據字符顏色和背景顏色變?yōu)榛疑?，并且?shù)據列中不顯示任何內容。
? 輸入數據
每個視圖上可以輸入數據的單元格框用黑色邊框顯示。
? 修改時的字符顏色
當輸入新值時，顏色將從黑色變?yōu)樗{色。
通過單擊Apply或Undo按鈕確認，顏色將從藍色變回到黑色。
? 過程位號數據
當位號名稱未正確定義時，其值顯示為灰色的-9999。
灰色：僅顯示
? 手動輸入數據
當未通過離線RQE將位號名稱分配給手動輸入數據時，默認位號名稱將自動按如下分配：
ManInput（N）：在輸入順序中，N從1開始分配。
? Apply/Undo（應用/撤消）按鈕
當單擊了對話框上的Apply（應用）按鈕時，接受輸入數據。
當單擊Undo（撤消）按鈕時，輸入數據被拒絕，并顯示先前的數據。
? 退出
通過單擊File -> Exit（文件 - >退出）或單擊關閉屏幕右上角的窗口圖標Close the window（關閉面板）。
? 顯示模式
在APC客戶端PC中，可使用工程模式和操作員模式。
Exarqe工程顯示只能在工程模式下打開。與其他面板中的模式?jīng)]有區別。
工程師和操作員模式在安裝時選擇。在Web客戶端中，客戶可以使用客戶端構建器定義操作模式。
? 顯示數據
可以使用后面描述的Client Window Builder（客戶端窗口搭建器）編輯每個視圖的顯示數據。下例的顯示為默認值。
? DCS項目名
“位號名稱+項目名稱”的最大長度為64個字符。
? 每個視圖的刷新周期
這取決于系統環境。以下是標準性能數據。
主面板刷新周期：30秒
ICON狀態刷新周期：17秒（HMI客戶端，APC客戶端）
30秒（Web客戶端）
? 初始顯示
當應用程序視圖上顯示的數據量較大時，將顯示一個登錄時間。在這種情況下，屏幕上將顯示“Loading…（正在加載...）”的消息。?
? 當應用程序（控制器/預估器）停止時
當應用程序停止時，數據仍顯示在每個應用程序視圖上，但這些數據無法在屏幕上進行設置或更改。
從下一章開始將解釋每個視圖的詳細信息。
注意：
在R4中，可以使用Client Window Builder（客戶端窗口構建器）選擇每個視圖中顯示的數據項。默認視圖也已準備好，即使它并不包括在所有項目中。
原文：
B3.5. Common Specifications
? Background color of data and message area
White: It shows the corresponding values in the same row are ACTIVE.
Gray: It shows the corresponding values in the same row are INACTIVE.
? Data no appear
The data character color and the background color become gray when the display data doesn't exist, and nothing is displayed in the data column.
? Entry Data
The cell frame where data can be entered on each view is shown with black border.
? Character color when modified
When a new value is entered, the color will change from Black to Blue.
After confirming it by clicking ˉApplyˇ or ˉUndoˇ button, the color will be back from Blue to Black.
? Process tag data
When the tag name is not defined correctly, its value is displayed as ˉ-9999ˇ in gray.
Gray: Display only
? Manual input data
When the tag name is not assigned to manual input data by RQE offline, the default tag name is automatically assigned as follows:
ManInput(N): N is assigned from 1 in the input order.
? Apply/Undo button
When the Apply button on the dialog is clicked, the input data is accepted.
When the Undo button is clicked, the input data is rejected and the previous data is displayed.
? Exit
The panel is closed by clicking File -> Exit or click the Close the window icon at the up-right corner of the screen.
? Display mode
In the APC client PC, the engineering mode and the operator mode are available.
Exarqe Engineering Display can be opened only for the engineering mode. There is no difference by the mode in other panels.
The Selection of engineer and operator mode is on installation. In the Web client, the customer can define the operation mode using the client builder.
? Display Data
The display data of each view can be edited by using Client Window Builder described later. The following examples of the screen are the default values.
? DCS Item name
Maximum length of ‘Tag name + Item name’ is totally 64 characters.
? Refresh period of each views
It depends on the system environment. Following is the standard performance data.
Main panel refresh period: 30 second
ICON status refresh period : 17 second (HMI client, APC client)
30 second (Web client)
? Initial display
When the number of data displayed on an application view is large, it will take a logn time to be displayed. In this case the message “Loading…” will appear on the screen.
? When the application (controller / estimator) stops
When the application stops, the data are still shown on each application view, though these data cannot be set or changed from the screen.
From the next chapter, detail information of each view is explained.
Cation:
In R4, data items displayed in each view can be selectable using the Client Window Builder. The default view is also prepared, even though it does not include all items.
2016.12.8
