前文已經介紹了消息存儲中使用到的充要對象, 本文分析一下消息介紹的主流程. 另外, 此篇主要分析消息存儲主流程的代碼, 不影響主流程的代碼先不看, 降低復雜度.

1. 消息存儲入口

以單元測試中的代碼為例, 一點點深入.
先看單元測試DefaultMessageStoreTest中的一段測試代碼.

@Test
public void testWriteAndRead() throws Exception {
    long totalMsgs = 100;
    QUEUE_TOTAL = 1;
    MessageBody = StoreMessage.getBytes();

    MessageStoreConfig messageStoreConfig = new MessageStoreConfig();
    //設置CommitLog使用的MappedFile尺寸為512byte
    messageStoreConfig.setMapedFileSizeCommitLog(512);
    //設置ConsumeQueue使用的MappedFile尺寸為512byte
    messageStoreConfig.setMapedFileSizeConsumeQueue(512);
    /**
     * indexService相關,消息索引服務相關的代碼可以先放一下,先看存儲主流程
     */
    messageStoreConfig.setMaxHashSlotNum(100);
    messageStoreConfig.setMaxIndexNum(100 * 10);
    /**
     * END indexService相關,以后再看
     */
    //啟動一個MessageStore實例, 其中構造函數中使用的參數也可以暫時忽略, 以后再看.
    MessageStore master = new DefaultMessageStore(messageStoreConfig, null, new MyMessageArrivingListener(), new BrokerConfig());
    //裝載CommitLog, ConsumeQueue等重要數據
    boolean load = master.load();
    assertTrue(load);
    //啟動服務
    master.start();
    try {
        for (long i = 0; i < totalMsgs; i++) {
            //存儲消息
            master.putMessage(buildMessage());
        }

        for (long i = 0; i < totalMsgs; i++) {
            GetMessageResult result = master.getMessage("GROUP_A", "TOPIC_A", 0, i, 1024 * 1024, null);
            assertThat(result).isNotNull();
            result.release();
        }
    } finally {
        master.shutdown();
        //master.destroy();
    }
}
//構建消息體
public MessageExtBrokerInner buildMessage() {
    MessageExtBrokerInner msg = new MessageExtBrokerInner();
    msg.setTopic("FooBar");
    msg.setTags("TAG1");
    msg.setKeys("Hello");
    msg.setBody(MessageBody);
    msg.setKeys(String.valueOf(System.currentTimeMillis()));
    msg.setQueueId(Math.abs(QueueId.getAndIncrement()) % QUEUE_TOTAL);
    msg.setSysFlag(4); //sysFlag的值參考MessageSysFlag
    msg.setBornTimestamp(System.currentTimeMillis());
    msg.setStoreHost(StoreHost);
    msg.setBornHost(BornHost);
    return msg;
}

可以看到存儲消息的操作就是一個putMessage, 但在此之前需要進行l(wèi)oad操作, 把一些重要數據load進內存.

2. putMessage

接下來看putMessage方法.

public PutMessageResult putMessage(MessageExtBrokerInner msg) {
    if (this.shutdown) {
        log.warn("message store has shutdown, so putMessage is forbidden");
        return new PutMessageResult(PutMessageStatus.SERVICE_NOT_AVAILABLE, null);
    }

    //SLAVE不存放
    if (BrokerRole.SLAVE == this.messageStoreConfig.getBrokerRole()) {
        long value = this.printTimes.getAndIncrement();
        if ((value % 50000) == 0) {
            log.warn("message store is slave mode, so putMessage is forbidden ");
        }

        return new PutMessageResult(PutMessageStatus.SERVICE_NOT_AVAILABLE, null);
    }

    //當前狀態不可寫入
    if (!this.runningFlags.isWriteable()) {
        long value = this.printTimes.getAndIncrement();
        if ((value % 50000) == 0) {
            log.warn("message store is not writeable, so putMessage is forbidden " + this.runningFlags.getFlagBits());
        }

        return new PutMessageResult(PutMessageStatus.SERVICE_NOT_AVAILABLE, null);
    } else {
        this.printTimes.set(0);
    }

    //topic長度超過Byte.MAX_VALUE
    if (msg.getTopic().length() > Byte.MAX_VALUE) {
        log.warn("putMessage message topic length too long " + msg.getTopic().length());
        return new PutMessageResult(PutMessageStatus.MESSAGE_ILLEGAL, null);
    }

    if (msg.getPropertiesString() != null && msg.getPropertiesString().length() > Short.MAX_VALUE) {
        log.warn("putMessage message properties length too long " + msg.getPropertiesString().length());
        return new PutMessageResult(PutMessageStatus.PROPERTIES_SIZE_EXCEEDED, null);
    }

    //OS頁緩存忙碌, 這是一個很有意思的方法, 感興趣可以自己看一下實現
    if (this.isOSPageCacheBusy()) {
        return new PutMessageResult(PutMessageStatus.OS_PAGECACHE_BUSY, null);
    }

    long beginTime = this.getSystemClock().now();
    //將消息放入commitLog
    PutMessageResult result = this.commitLog.putMessage(msg);

    long eclipseTime = this.getSystemClock().now() - beginTime;
    if (eclipseTime > 500) {
        log.warn("putMessage not in lock eclipse time(ms)={}, bodyLength={}", eclipseTime, msg.getBody().length);
    }
    //統計服務
    this.storeStatsService.setPutMessageEntireTimeMax(eclipseTime);

    if (null == result || !result.isOk()) {
        this.storeStatsService.getPutMessageFailedTimes().incrementAndGet();
    }

    return result;
}

3. CommitLog.putMessage

CommitLog是存放消息實體的地方, 最終消息會放到CommitLog引用的MappedFile中.
下面是CommitLog的putMessage代碼, 為了便于理解, 忽略部分代碼.

public PutMessageResult putMessage(final MessageExtBrokerInner msg) {
    // Set the storage time
    msg.setStoreTimestamp(System.currentTimeMillis());
    // Set the message body BODY CRC (consider the most appropriate setting
    // on the client)
    msg.setBodyCRC(UtilAll.crc32(msg.getBody()));
    // Back to Results
    AppendMessageResult result = null;

    StoreStatsService storeStatsService = this.defaultMessageStore.getStoreStatsService();

    String topic = msg.getTopic();
    int queueId = msg.getQueueId();

    final int tranType = MessageSysFlag.getTransactionValue(msg.getSysFlag());
    //定時消息處理
    .......

    long eclipseTimeInLock = 0;
    MappedFile unlockMappedFile = null;
    MappedFile mappedFile = this.mappedFileQueue.getLastMappedFile();

    //開始, 寫入消息部分
    //上鎖, 準備插入數據
    lockForPutMessage(); //spin...
    try {
        long beginLockTimestamp = this.defaultMessageStore.getSystemClock().now();
        this.beginTimeInLock = beginLockTimestamp;

        // Here settings are stored timestamp, in order to ensure an orderly
        // global
        msg.setStoreTimestamp(beginLockTimestamp);

        if (null == mappedFile || mappedFile.isFull()) {
            mappedFile = this.mappedFileQueue.getLastMappedFile(0); // Mark: NewFile may be cause noise
        }
        if (null == mappedFile) {
            log.error("create maped file1 error, topic: " + msg.getTopic() + " clientAddr: " + msg.getBornHostString());
            beginTimeInLock = 0;
            return new PutMessageResult(PutMessageStatus.CREATE_MAPEDFILE_FAILED, null);
        }

        result = mappedFile.appendMessage(msg, this.appendMessageCallback);
        switch (result.getStatus()) {
            case PUT_OK:
                break;
            case END_OF_FILE:
                unlockMappedFile = mappedFile;
                // Create a new file, re-write the message
                mappedFile = this.mappedFileQueue.getLastMappedFile(0);
                if (null == mappedFile) {
                    // XXX: warn and notify me
                    log.error("create maped file2 error, topic: " + msg.getTopic() + " clientAddr: " + msg.getBornHostString());
                    beginTimeInLock = 0;
                    return new PutMessageResult(PutMessageStatus.CREATE_MAPEDFILE_FAILED, result);
                }
                result = mappedFile.appendMessage(msg, this.appendMessageCallback);
                break;
            case MESSAGE_SIZE_EXCEEDED:
            case PROPERTIES_SIZE_EXCEEDED:
                beginTimeInLock = 0;
                return new PutMessageResult(PutMessageStatus.MESSAGE_ILLEGAL, result);
            case UNKNOWN_ERROR:
                beginTimeInLock = 0;
                return new PutMessageResult(PutMessageStatus.UNKNOWN_ERROR, result);
            default:
                beginTimeInLock = 0;
                return new PutMessageResult(PutMessageStatus.UNKNOWN_ERROR, result);
        }

        eclipseTimeInLock = this.defaultMessageStore.getSystemClock().now() - beginLockTimestamp;
        beginTimeInLock = 0;
    } finally {
        //解鎖
        releasePutMessageLock();
    }
    //結束, 寫入消息部分
    if (eclipseTimeInLock > 500) {
        log.warn("[NOTIFYME]putMessage in lock cost time(ms)={}, bodyLength={} AppendMessageResult={}", eclipseTimeInLock, msg.getBody().length, result);
    }

    if (null != unlockMappedFile && this.defaultMessageStore.getMessageStoreConfig().isWarmMapedFileEnable()) {
        this.defaultMessageStore.unlockMappedFile(unlockMappedFile);
    }

    PutMessageResult putMessageResult = new PutMessageResult(PutMessageStatus.PUT_OK, result);

    // Statistics
    storeStatsService.getSinglePutMessageTopicTimesTotal(msg.getTopic()).incrementAndGet();
    storeStatsService.getSinglePutMessageTopicSizeTotal(topic).addAndGet(result.getWroteBytes());

    GroupCommitRequest request = null;
    //開始, 刷盤策略部分
    // Synchronization flush
    if (FlushDiskType.SYNC_FLUSH == this.defaultMessageStore.getMessageStoreConfig().getFlushDiskType()) {
        final GroupCommitService service = (GroupCommitService) this.flushCommitLogService;
        if (msg.isWaitStoreMsgOK()) {
            request = new GroupCommitRequest(result.getWroteOffset() + result.getWroteBytes());
            service.putRequest(request);
            boolean flushOK = request.waitForFlush(this.defaultMessageStore.getMessageStoreConfig().getSyncFlushTimeout());
            if (!flushOK) {
                log.error("do groupcommit, wait for flush failed, topic: " + msg.getTopic() + " tags: " + msg.getTags()
                    + " client address: " + msg.getBornHostString());
                putMessageResult.setPutMessageStatus(PutMessageStatus.FLUSH_DISK_TIMEOUT);
            }
        } else {
            service.wakeup();
        }
    }
    // Asynchronous flush
    else {
        if (!this.defaultMessageStore.getMessageStoreConfig().isTransientStorePoolEnable()) {
            flushCommitLogService.wakeup();
        } else {
            commitLogService.wakeup();
        }
    }
    //結束, 刷盤策略部分
    //雙寫, 這部分代碼可以先不看, 不影響主流程.
    ..........

    return putMessageResult;
}

以上代碼主要分為兩部分: 寫入消息和刷盤策略.

• 寫入消息部分, 再準備寫入前, 先上鎖, 然后調用mappedFile的appendMessage方法將數據寫入.
• 刷盤策略部分, 根據不同的耍盤策略調用不同的刷盤服務

4. AppendMessage

寫入消息的核心就是appendMessage, 該過程分為兩部分, 先從MappedFile中獲得byteBuffer, 再利用AppendMessageCallback將msg寫入到byteBuffer中.
先看MappedFile的appendMessage方法.

public AppendMessageResult appendMessage(final MessageExtBrokerInner msg, final AppendMessageCallback cb) {
    assert msg != null;
    assert cb != null;

    int currentPos = this.wrotePosition.get();

    if (currentPos < this.fileSize) {
        //獲取ByteBuffer
        ByteBuffer byteBuffer = writeBuffer != null ? writeBuffer.slice() : this.mappedByteBuffer.slice();
        byteBuffer.position(currentPos);
        AppendMessageResult result =
            cb.doAppend(this.getFileFromOffset(), byteBuffer, this.fileSize - currentPos, msg);
        this.wrotePosition.addAndGet(result.getWroteBytes());
        this.storeTimestamp = result.getStoreTimestamp();
        return result;
    }

    log.error("MappedFile.appendMessage return null, wrotePosition: " + currentPos + " fileSize: "
        + this.fileSize);
    return new AppendMessageResult(AppendMessageStatus.UNKNOWN_ERROR);

MappedFile會根據writeBuffer來選擇不同的ByteBuffer, 而AppendMessageCallback負責將msg寫入ByteBuffer中, 而不管這個ByteBuffer來自何處.
看AppendMessageCallback的doAppend方法.

public AppendMessageResult doAppend(final long fileFromOffset, final ByteBuffer byteBuffer, final int maxBlank, final MessageExtBrokerInner msgInner) {
    // STORETIMESTAMP + STOREHOSTADDRESS + OFFSET <br>

    // PHY OFFSET
    long wroteOffset = fileFromOffset + byteBuffer.position();

    this.resetByteBuffer(hostHolder, 8);
    String msgId = MessageDecoder.createMessageId(this.msgIdMemory, msgInner.getStoreHostBytes(hostHolder), wroteOffset);

    // Record ConsumeQueue information
    keyBuilder.setLength(0);
    keyBuilder.append(msgInner.getTopic());
    keyBuilder.append('-');
    keyBuilder.append(msgInner.getQueueId());
    String key = keyBuilder.toString();
    Long queueOffset = CommitLog.this.topicQueueTable.get(key);
    if (null == queueOffset) {
        queueOffset = 0L;
        CommitLog.this.topicQueueTable.put(key, queueOffset);
    }

    // Transaction messages that require special handling
    final int tranType = MessageSysFlag.getTransactionValue(msgInner.getSysFlag());
    switch (tranType) {
        // Prepared and Rollback message is not consumed, will not enter the
        // consumer queuec
        case MessageSysFlag.TRANSACTION_PREPARED_TYPE:
        case MessageSysFlag.TRANSACTION_ROLLBACK_TYPE:
            queueOffset = 0L;
            break;
        case MessageSysFlag.TRANSACTION_NOT_TYPE:
        case MessageSysFlag.TRANSACTION_COMMIT_TYPE:
        default:
            break;
    }

    /**
     * Serialize message
     */
    final byte[] propertiesData =
        msgInner.getPropertiesString() == null ? null : msgInner.getPropertiesString().getBytes(MessageDecoder.CHARSET_UTF8);

    final int propertiesLength = propertiesData == null ? 0 : propertiesData.length;

    if (propertiesLength > Short.MAX_VALUE) {
        log.warn("putMessage message properties length too long. length={}", propertiesData.length);
        return new AppendMessageResult(AppendMessageStatus.PROPERTIES_SIZE_EXCEEDED);
    }

    final byte[] topicData = msgInner.getTopic().getBytes(MessageDecoder.CHARSET_UTF8);
    final int topicLength = topicData.length;

    final int bodyLength = msgInner.getBody() == null ? 0 : msgInner.getBody().length;

    final int msgLen = calMsgLength(bodyLength, topicLength, propertiesLength);

    // Exceeds the maximum message
    if (msgLen > this.maxMessageSize) {
        CommitLog.log.warn("message size exceeded, msg total size: " + msgLen + ", msg body size: " + bodyLength
            + ", maxMessageSize: " + this.maxMessageSize);
        return new AppendMessageResult(AppendMessageStatus.MESSAGE_SIZE_EXCEEDED);
    }

    // Determines whether there is sufficient free space
    if ((msgLen + END_FILE_MIN_BLANK_LENGTH) > maxBlank) {
        this.resetByteBuffer(this.msgStoreItemMemory, maxBlank);
        // 1 TOTALSIZE
        this.msgStoreItemMemory.putInt(maxBlank);
        // 2 MAGICCODE
        this.msgStoreItemMemory.putInt(CommitLog.BLANK_MAGIC_CODE);
        // 3 The remaining space may be any value
        //

        // Here the length of the specially set maxBlank
        final long beginTimeMills = CommitLog.this.defaultMessageStore.now();
        byteBuffer.put(this.msgStoreItemMemory.array(), 0, maxBlank);
        return new AppendMessageResult(AppendMessageStatus.END_OF_FILE, wroteOffset, maxBlank, msgId, msgInner.getStoreTimestamp(),
            queueOffset, CommitLog.this.defaultMessageStore.now() - beginTimeMills);
    }

    // Initialization of storage space
    this.resetByteBuffer(msgStoreItemMemory, msgLen);
    // 1 TOTALSIZE
    this.msgStoreItemMemory.putInt(msgLen);
    // 2 MAGICCODE
    this.msgStoreItemMemory.putInt(CommitLog.MESSAGE_MAGIC_CODE);
    // 3 BODYCRC
    this.msgStoreItemMemory.putInt(msgInner.getBodyCRC());
    // 4 QUEUEID
    this.msgStoreItemMemory.putInt(msgInner.getQueueId());
    // 5 FLAG
    this.msgStoreItemMemory.putInt(msgInner.getFlag());
    // 6 QUEUEOFFSET
    this.msgStoreItemMemory.putLong(queueOffset);
    // 7 PHYSICALOFFSET
    this.msgStoreItemMemory.putLong(fileFromOffset + byteBuffer.position());
    // 8 SYSFLAG
    this.msgStoreItemMemory.putInt(msgInner.getSysFlag());
    // 9 BORNTIMESTAMP
    this.msgStoreItemMemory.putLong(msgInner.getBornTimestamp());
    // 10 BORNHOST
    this.resetByteBuffer(hostHolder, 8);
    this.msgStoreItemMemory.put(msgInner.getBornHostBytes(hostHolder));
    // 11 STORETIMESTAMP
    this.msgStoreItemMemory.putLong(msgInner.getStoreTimestamp());
    // 12 STOREHOSTADDRESS
    this.resetByteBuffer(hostHolder, 8);
    this.msgStoreItemMemory.put(msgInner.getStoreHostBytes(hostHolder));
    //this.msgStoreItemMemory.put(msgInner.getStoreHostBytes());
    // 13 RECONSUMETIMES
    this.msgStoreItemMemory.putInt(msgInner.getReconsumeTimes());
    // 14 Prepared Transaction Offset
    this.msgStoreItemMemory.putLong(msgInner.getPreparedTransactionOffset());
    // 15 BODY
    this.msgStoreItemMemory.putInt(bodyLength);
    if (bodyLength > 0)
        this.msgStoreItemMemory.put(msgInner.getBody());
    // 16 TOPIC
    this.msgStoreItemMemory.put((byte) topicLength);
    this.msgStoreItemMemory.put(topicData);
    // 17 PROPERTIES
    this.msgStoreItemMemory.putShort((short) propertiesLength);
    if (propertiesLength > 0)
        this.msgStoreItemMemory.put(propertiesData);

    final long beginTimeMills = CommitLog.this.defaultMessageStore.now();
    // Write messages to the queue buffer
    byteBuffer.put(this.msgStoreItemMemory.array(), 0, msgLen);

    AppendMessageResult result = new AppendMessageResult(AppendMessageStatus.PUT_OK, wroteOffset, msgLen, msgId,
        msgInner.getStoreTimestamp(), queueOffset, CommitLog.this.defaultMessageStore.now() - beginTimeMills);

    switch (tranType) {
        case MessageSysFlag.TRANSACTION_PREPARED_TYPE:
        case MessageSysFlag.TRANSACTION_ROLLBACK_TYPE:
            break;
        case MessageSysFlag.TRANSACTION_NOT_TYPE:
        case MessageSysFlag.TRANSACTION_COMMIT_TYPE:
            // The next update ConsumeQueue information
            CommitLog.this.topicQueueTable.put(key, ++queueOffset);
            break;
        default:
            break;
    }
    return result;
}

這部分的邏輯比較簡單, 就是簡單的字節操作. 數據寫入的ByteBuffer后, 就只等到刷盤的時候, 把數據刷到磁盤, 就真正完成了持久化. 下面看刷盤策略.

5. 刷盤策略

RocketMQ的刷盤策略可分為同步和異步兩種, 首先看同步刷盤策略.

同步刷盤

由GroupCommitService完成, 核心部分代碼:

//構建刷盤請求
request = new GroupCommitRequest(result.getWroteOffset() + result.getWroteBytes());
//將請求放入servie的隊列中
service.putRequest(request);
//阻塞, 等待刷盤完成
boolean flushOK = request.waitForFlush(this.defaultMessageStore.getMessageStoreConfig().getSyncFlushTimeout());

request首先會被放到GroupCommitService的requestsWrite隊列中, 等到requestsRead中的請求被處理完后, 最終會放到requestsRead隊列中.
主線程利用GroupCommitRequest中的countDownLatch阻塞.
接下來看GroupCommitService處理請求的代碼:

private void doCommit() {
    //上鎖
    synchronized (this.requestsRead) {
        if (!this.requestsRead.isEmpty()) {
            //迭代處理requestsRead隊列中的請求
            for (GroupCommitRequest req : this.requestsRead) {
                // There may be a message in the next file, so a maximum of
                // two times the flush
                boolean flushOK = false;
                //重試
                for (int i = 0; i < 2 && !flushOK; i++) {
                    //當前已經刷盤的位置是否大于等于請求刷盤位置, flushOK＝false說明需要刷盤
                    flushOK = CommitLog.this.mappedFileQueue.getFlushedWhere() >= req.getNextOffset();

                    if (!flushOK) {
                        //調用MappedFile的刷盤方法
                        CommitLog.this.mappedFileQueue.flush(0);
                    }
                }
                //利用countDownLatch喚醒主線程
                req.wakeupCustomer(flushOK);
            }

            long storeTimestamp = CommitLog.this.mappedFileQueue.getStoreTimestamp();
            if (storeTimestamp > 0) {
                CommitLog.this.defaultMessageStore.getStoreCheckpoint().setPhysicMsgTimestamp(storeTimestamp);
            }

            this.requestsRead.clear();
        } else {
            // Because of individual messages is set to not sync flush, it
            // will come to this process
            CommitLog.this.mappedFileQueue.flush(0);
        }
    }
}

可以看到刷盤完成后, GroupCommitService會利用GroupCommitRequest中的countDownLatch喚醒主線程.

異步刷盤

異步刷盤和同步刷盤的區別在于, 異步刷盤時, 主線程并不會阻塞, 在將刷盤線程wakeup后, 就會繼續執行.
異步刷盤有兩個service,CommitRealTimeService和FlushRealTimeService可以使用.

CommitRealTimeService

當transientStorePoolEnable ＝ true 并且是異步刷盤時,使用CommitRealTimeService. CommitRealTimeService每隔一段時間會進行一次刷盤.

public void run() {
    CommitLog.log.info(this.getServiceName() + " service started");
    while (!this.isStopped()) {
        //刷盤間隔
        int interval = CommitLog.this.defaultMessageStore.getMessageStoreConfig().getCommitIntervalCommitLog();
        //刷盤page
        int commitDataLeastPages = CommitLog.this.defaultMessageStore.getMessageStoreConfig().getCommitCommitLogLeastPages();

        int commitDataThoroughInterval =
            CommitLog.this.defaultMessageStore.getMessageStoreConfig().getCommitCommitLogThoroughInterval();

        long begin = System.currentTimeMillis();
        if (begin >= (this.lastCommitTimestamp + commitDataThoroughInterval)) {
            this.lastCommitTimestamp = begin;
            commitDataLeastPages = 0;
        }

        try {
            //調用mappedFileQueue的commit來進行刷盤
            boolean result = CommitLog.this.mappedFileQueue.commit(commitDataLeastPages);
            long end = System.currentTimeMillis();
            if (!result) {
                this.lastCommitTimestamp = end; // result = false means some data committed.
                //now wake up flush thread.
                flushCommitLogService.wakeup();
            }

            if (end - begin > 500) {
                log.info("Commit data to file costs {} ms", end - begin);
            }
            this.waitForRunning(interval);
        } catch (Throwable e) {
            CommitLog.log.error(this.getServiceName() + " service has exception. ", e);
        }
    }

    boolean result = false;
    for (int i = 0; i < RETRY_TIMES_OVER && !result; i++) {
        result = CommitLog.this.mappedFileQueue.commit(0);
        CommitLog.log.info(this.getServiceName() + " service shutdown, retry " + (i + 1) + " times " + (result ? "OK" : "Not OK"));
    }
    CommitLog.log.info(this.getServiceName() + " service end");
}

FlushRealTimeService

FlushRealTimeService與CommitRealTimeService的主要區別在于支持是否定時刷盤, 詳細代碼此處不再貼出.

6. 總結

本文只分析了消息是怎么持久化到磁盤的, 具體的RocketMQ是如何處理接收到的消息的(是否要存儲或者忽略), 因?yàn)樵O(shè)計到不同的角色, 不同的模式會更加復雜, 以后再做分析.