1 Fabric CA概述
Fabric CA是超級賬本的數字證書認證中心，提供如下功能：
- 用戶信息的注冊(身份認證，或者從 LDAP 中獲取注冊信息)
- 數字證書的發行
a. 發行擔保證書 ECerts (Enrollment Certificates)
b. 發行交易證書 TCerts (Transaction Certificates)，保障 Hyperledger Fabric 區域鏈交易平臺上的信息匿名性和不可追蹤性； - 數字證書的延期和吊銷
Fabric CA由服務端 和 客戶端組成(c/s架構)。下圖描述了Fabric CA組件在整個超級賬本架構中的作用
image
- root CA不會直接為服務器/客戶端簽證。它會先生成幾個中間CA（intermediate CAS）
- 中間CA作為root CA的代表為服務器和客戶端簽證
2 CA server
2.1 數據存儲
提供用戶登記和注冊的數字證書管理功能，數據存儲后端可以為Mysql/PostgreSQL/LDAP等
PostgreSQL / MySQL
- fabric CA的默認數據庫是sqlite，默認數據庫文件是 fabric-ca-server.db
- 如果想要在集群中運行Fabric CA, 則必須使用PostgreSQL或者M(jìn)ySQL
- 數據庫連接可以啟動SSL模式，具體數據庫SSL模式配置詳見 PostgreSQL, MySQL
配置文件示例
db:
## PostgreSQL
type: postgres
datasource: host=localhost port=5432 user=Username password=Password dbname=fabric_ca sslmode=verify-full
## MySQL
# type: mysql
# datasource: root:rootpw@tcp(localhost:3306)/fabric_ca?parseTime=true&tls=custom
## TLS setting
tls:
enabled: true
certfiles:
- db-server-cert.pem
client:
certfile: db-client-cert.pem
keyfile: db-client-key.pem
LDAP
CA server也可以連接到LDAP服務器，進行：
- 在enroll之前進行身份驗證
- Fabric CA client 或者Fabric client SDK 發送一個enroll請求，請求頭部有基本的授權信息
- CA server收到請求后，從頭部解密出需要授權的主體identity name和密碼，然后根據user filter規則 用header中的name獲取在LDAP中的對應實體記錄，用header中的password對這個LDAP對象進行綁定。如果綁定成功則繼續進行后面的授權操作
- 獲取授權所必須的identity參數
2.2 負載均衡
數據存儲和業務邏輯分離，F(xiàn)abric CA服務能夠采用無狀態集群部署。通過HAProxy等軟件實現“負載均衡”&“服務高可用”
多集群下的request請求過程：Fabric CA 客戶端或 SDK 的請求首先會到達 Fabric CA 集群前端的高可用負載均衡服務端，實際的 CA 服務由后端的某臺Fabric CA 服務端提供。
同一集群中的所有 Fabric CA 服務端共享相同的后端數據庫（或 LDAP）集群，以確保證書和身份的一致性。
2.3 與CA服務端的交互
與 Fabric CA 服務端交互的方式有如下兩種：
- 通過 Fabric CA 客戶端
- 使用某種 Fabric SDK
與 Fabric CA Server端的所有通信，都是通過 REST API 進行的。詳情可查看 fabric-ca/swagger/swagger-fabric-ca.json 處的 swagger 文檔中的 REST API 部分。
2.4 root CA 和intermediate CA
2.5 server 運維操作
運維操作的TLS鑒權
- 運維接口有一套獨立的TLS鑒權
- 當啟用tls時必須要有相應的TLS證書才能調用運維類接口
- TLS內部可以啟用client證書驗證，只有提供了指定rootCA頒發的client證書才能訪問所有的資源（Metrics）
server數據監控 Metrics
- 支持Prometheus 和 StatsD兩種方式
- 詳細的運維接口API
附錄:完整的config文件參考
#############################################################################
# This is a configuration file for the fabric-ca-server command.
#
# COMMAND LINE ARGUMENTS AND ENVIRONMENT VARIABLES
# ------------------------------------------------
# Each configuration element can be overridden via command line
# arguments or environment variables. The precedence for determining
# the value of each element is as follows:
# 1) command line argument
# Examples:
# a) --port 443
# To set the listening port
# b) --ca.keyfile ../mykey.pem
# To set the "keyfile" element in the "ca" section below;
# note the '.' separator character.
# 2) environment variable
# Examples:
# a) FABRIC_CA_SERVER_PORT=443
# To set the listening port
# b) FABRIC_CA_SERVER_CA_KEYFILE="../mykey.pem"
# To set the "keyfile" element in the "ca" section below;
# note the '_' separator character.
# 3) configuration file
# 4) default value (if there is one)
# All default values are shown beside each element below.
#
# FILE NAME ELEMENTS
# ------------------
# The value of all fields whose name ends with "file" or "files" are
# name or names of other files.
# For example, see "tls.certfile" and "tls.clientauth.certfiles".
# The value of each of these fields can be a simple filename, a
# relative path, or an absolute path. If the value is not an
# absolute path, it is interpretted as being relative to the location
# of this configuration file.
#
#############################################################################
# Version of config file
version: <<<VERSION>>>
# Server's listening port (default: 7054)
port: 7054
# Cross-Origin Resource Sharing (CORS)
cors:
enabled: false
origins:
- "*"
# Enables debug logging (default: false)
debug: false
# Size limit of an acceptable CRL in bytes (default: 512000)
crlsizelimit: 512000
#############################################################################
# TLS section for the server's listening port
#
# The following types are supported for client authentication: NoClientCert,
# RequestClientCert, RequireAnyClientCert, VerifyClientCertIfGiven,
# and RequireAndVerifyClientCert.
#
# Certfiles is a list of root certificate authorities that the server uses
# when verifying client certificates.
#############################################################################
tls:
# Enable TLS (default: false)
enabled: false
# TLS for the server's listening port
certfile:
keyfile:
clientauth:
type: noclientcert
certfiles:
#############################################################################
# The CA section contains information related to the Certificate Authority
# including the name of the CA, which should be unique for all members
# of a blockchain network. It also includes the key and certificate files
# used when issuing enrollment certificates (ECerts) and transaction
# certificates (TCerts).
# The chainfile (if it exists) contains the certificate chain which
# should be trusted for this CA, where the 1st in the chain is always the
# root CA certificate.
#############################################################################
ca:
# Name of this CA
name:
# Key file (is only used to import a private key into BCCSP)
keyfile:
# Certificate file (default: ca-cert.pem)
certfile:
# Chain file
chainfile:
#############################################################################
# The gencrl REST endpoint is used to generate a CRL that contains revoked
# certificates. This section contains configuration options that are used
# during gencrl request processing.
#############################################################################
crl:
# Specifies expiration for the generated CRL. The number of hours
# specified by this property is added to the UTC time, the resulting time
# is used to set the 'Next Update' date of the CRL.
expiry: 24h
#############################################################################
# The registry section controls how the fabric-ca-server does two things:
# 1) authenticates enrollment requests which contain a username and password
# (also known as an enrollment ID and secret).
# 2) once authenticated, retrieves the identity's attribute names and
# values which the fabric-ca-server optionally puts into TCerts
# which it issues for transacting on the Hyperledger Fabric blockchain.
# These attributes are useful for making access control decisions in
# chaincode.
# There are two main configuration options:
# 1) The fabric-ca-server is the registry.
# This is true if "ldap.enabled" in the ldap section below is false.
# 2) An LDAP server is the registry, in which case the fabric-ca-server
# calls the LDAP server to perform these tasks.
# This is true if "ldap.enabled" in the ldap section below is true,
# which means this "registry" section is ignored.
#############################################################################
registry:
# Maximum number of times a password/secret can be reused for enrollment
# (default: -1, which means there is no limit)
maxenrollments: -1
# Contains identity information which is used when LDAP is disabled
identities:
- name: <<<adminUserName>>>
pass: <<<adminPassword>>>
type: client
affiliation: ""
attrs:
hf.Registrar.Roles: "*"
hf.Registrar.DelegateRoles: "*"
hf.Revoker: true
hf.IntermediateCA: true
hf.GenCRL: true
hf.Registrar.Attributes: "*"
hf.AffiliationMgr: true
#############################################################################
# Database section
# Supported types are: "sqlite3", "postgres", and "mysql".
# The datasource value depends on the type.
# If the type is "sqlite3", the datasource value is a file name to use
# as the database store. Since "sqlite3" is an embedded database, it
# may not be used if you want to run the fabric-ca-server in a cluster.
# To run the fabric-ca-server in a cluster, you must choose "postgres"
# or "mysql".
#############################################################################
db:
type: sqlite3
datasource: fabric-ca-server.db
tls:
enabled: false
certfiles:
client:
certfile:
keyfile:
#############################################################################
# LDAP section
# If LDAP is enabled, the fabric-ca-server calls LDAP to:
# 1) authenticate enrollment ID and secret (i.e. username and password)
# for enrollment requests;
# 2) To retrieve identity attributes
#############################################################################
ldap:
# Enables or disables the LDAP client (default: false)
# If this is set to true, the "registry" section is ignored.
enabled: false
# The URL of the LDAP server
url: ldap://<adminDN>:<adminPassword>@<host>:<port>/<base>
# TLS configuration for the client connection to the LDAP server
tls:
certfiles:
client:
certfile:
keyfile:
# Attribute related configuration for mapping from LDAP entries to Fabric CA attributes
attribute:
# 'names' is an array of strings containing the LDAP attribute names which are
# requested from the LDAP server for an LDAP identity's entry
names: ['uid','member']
# The 'converters' section is used to convert an LDAP entry to the value of
# a fabric CA attribute.
# For example, the following converts an LDAP 'uid' attribute
# whose value begins with 'revoker' to a fabric CA attribute
# named "hf.Revoker" with a value of "true" (because the boolean expression
# evaluates to true).
# converters:
# - name: hf.Revoker
# value: attr("uid") =~ "revoker*"
converters:
- name:
value:
# The 'maps' section contains named maps which may be referenced by the 'map'
# function in the 'converters' section to map LDAP responses to arbitrary values.
# For example, assume a user has an LDAP attribute named 'member' which has multiple
# values which are each a distinguished name (i.e. a DN). For simplicity, assume the
# values of the 'member' attribute are 'dn1', 'dn2', and 'dn3'.
# Further assume the following configuration.
# converters:
# - name: hf.Registrar.Roles
# value: map(attr("member"),"groups")
# maps:
# groups:
# - name: dn1
# value: peer
# - name: dn2
# value: client
# The value of the user's 'hf.Registrar.Roles' attribute is then computed to be
# "peer,client,dn3". This is because the value of 'attr("member")' is
# "dn1,dn2,dn3", and the call to 'map' with a 2nd argument of
# "group" replaces "dn1" with "peer" and "dn2" with "client".
maps:
groups:
- name:
value:
#############################################################################
# Affiliations section. Fabric CA server can be bootstrapped with the
# affiliations specified in this section. Affiliations are specified as maps.
# For example:
# businessunit1:
# department1:
# - team1
# businessunit2:
# - department2
# - department3
#
# Affiliations are hierarchical in nature. In the above example,
# department1 (used as businessunit1.department1) is the child of businessunit1.
# team1 (used as businessunit1.department1.team1) is the child of department1.
# department2 (used as businessunit2.department2) and department3 (businessunit2.department3)
# are children of businessunit2.
# Note: Affiliations are case sensitive except for the non-leaf affiliations
# (like businessunit1, department1, businessunit2) that are specified in the configuration file,
# which are always stored in lower case.
#############################################################################
affiliations:
org1:
- department1
- department2
org2:
- department1
#############################################################################
# Signing section
#
# The "default" subsection is used to sign enrollment certificates;
# the default expiration ("expiry" field) is "8760h", which is 1 year in hours.
#
# The "ca" profile subsection is used to sign intermediate CA certificates;
# the default expiration ("expiry" field) is "43800h" which is 5 years in hours.
# Note that "isca" is true, meaning that it issues a CA certificate.
# A maxpathlen of 0 means that the intermediate CA cannot issue other
# intermediate CA certificates, though it can still issue end entity certificates.
# (See RFC 5280, section 4.2.1.9)
#
# The "tls" profile subsection is used to sign TLS certificate requests;
# the default expiration ("expiry" field) is "8760h", which is 1 year in hours.
#############################################################################
signing:
default:
usage:
- digital signature
expiry: 8760h
profiles:
ca:
usage:
- cert sign
- crl sign
expiry: 43800h
caconstraint:
isca: true
maxpathlen: 0
tls:
usage:
- signing
- key encipherment
- server auth
- client auth
- key agreement
expiry: 8760h
###########################################################################
# Certificate Signing Request (CSR) section.
# This controls the creation of the root CA certificate.
# The expiration for the root CA certificate is configured with the
# "ca.expiry" field below, whose default value is "131400h" which is
# 15 years in hours.
# The pathlength field is used to limit CA certificate hierarchy as described
# in section 4.2.1.9 of RFC 5280.
# Examples:
# 1) No pathlength value means no limit is requested.
# 2) pathlength == 1 means a limit of 1 is requested which is the default for
# a root CA. This means the root CA can issue intermediate CA certificates,
# but these intermediate CAs may not in turn issue other CA certificates
# though they can still issue end entity certificates.
# 3) pathlength == 0 means a limit of 0 is requested;
# this is the default for an intermediate CA, which means it can not issue
# CA certificates though it can still issue end entity certificates.
###########################################################################
csr:
cn: <<<COMMONNAME>>>
keyrequest:
algo: ecdsa
size: 256
names:
- C: US
ST: "North Carolina"
L:
O: Hyperledger
OU: Fabric
hosts:
- <<<MYHOST>>>
- localhost
ca:
expiry: 131400h
pathlength: <<<PATHLENGTH>>>
###########################################################################
# Each CA can issue both X509 enrollment certificate as well as Idemix
# Credential. This section specifies configuration for the issuer component
# that is responsible for issuing Idemix credentials.
###########################################################################
idemix:
# Specifies pool size for revocation handles. A revocation handle is an unique identifier of an
# Idemix credential. The issuer will create a pool revocation handles of this specified size. When
# a credential is requested, issuer will get handle from the pool and assign it to the credential.
# Issuer will repopulate the pool with new handles when the last handle in the pool is used.
# A revocation handle and credential revocation information (CRI) are used to create non revocation proof
# by the prover to prove to the verifier that her credential is not revoked.
rhpoolsize: 1000
# The Idemix credential issuance is a two step process. First step is to get a nonce from the issuer
# and second step is send credential request that is constructed using the nonce to the isuser to
# request a credential. This configuration property specifies expiration for the nonces. By default is
# nonces expire after 15 seconds. The value is expressed in the time.Duration format (see https://golang.org/pkg/time/#ParseDuration).
nonceexpiration: 15s
# Specifies interval at which expired nonces are removed from datastore. Default value is 15 minutes.
# The value is expressed in the time.Duration format (see https://golang.org/pkg/time/#ParseDuration)
noncesweepinterval: 15m
#############################################################################
# BCCSP (BlockChain Crypto Service Provider) section is used to select which
# crypto library implementation to use
#############################################################################
bccsp:
default: SW
sw:
hash: SHA2
security: 256
filekeystore:
# The directory used for the software file-based keystore
keystore: msp/keystore
#############################################################################
# Multi CA section
#
# Each Fabric CA server contains one CA by default. This section is used
# to configure multiple CAs in a single server.
#
# 1) --cacount <number-of-CAs>
# Automatically generate <number-of-CAs> non-default CAs. The names of these
# additional CAs are "ca1", "ca2", ... "caN", where "N" is <number-of-CAs>
# This is particularly useful in a development environment to quickly set up
# multiple CAs. Note that, this config option is not applicable to intermediate CA server
# i.e., Fabric CA server that is started with intermediate.parentserver.url config
# option (-u command line option)
#
# 2) --cafiles <CA-config-files>
# For each CA config file in the list, generate a separate signing CA. Each CA
# config file in this list MAY contain all of the same elements as are found in
# the server config file except port, debug, and tls sections.
#
# Examples:
# fabric-ca-server start -b admin:adminpw --cacount 2
#
# fabric-ca-server start -b admin:adminpw --cafiles ca/ca1/fabric-ca-server-config.yaml
# --cafiles ca/ca2/fabric-ca-server-config.yaml
#
#############################################################################
cacount:
cafiles:
#############################################################################
# Intermediate CA section
#
# The relationship between servers and CAs is as follows:
# 1) A single server process may contain or function as one or more CAs.
# This is configured by the "Multi CA section" above.
# 2) Each CA is either a root CA or an intermediate CA.
# 3) Each intermediate CA has a parent CA which is either a root CA or another intermediate CA.
#
# This section pertains to configuration of #2 and #3.
# If the "intermediate.parentserver.url" property is set,
# then this is an intermediate CA with the specified parent
# CA.
#
# parentserver section
# url - The URL of the parent server
# caname - Name of the CA to enroll within the server
#
# enrollment section used to enroll intermediate CA with parent CA
# profile - Name of the signing profile to use in issuing the certificate
# label - Label to use in HSM operations
#
# tls section for secure socket connection
# certfiles - PEM-encoded list of trusted root certificate files
# client:
# certfile - PEM-encoded certificate file for when client authentication
# is enabled on server
# keyfile - PEM-encoded key file for when client authentication
# is enabled on server
#############################################################################
intermediate:
parentserver:
url:
caname:
enrollment:
hosts:
profile:
label:
tls:
certfiles:
client:
certfile:
keyfile:
#############################################################################
# CA configuration section
#
# Configure the number of incorrect password attempts are allowed for
# identities. By default, the value of 'passwordattempts' is 10, which
# means that 10 incorrect password attempts can be made before an identity get
# locked out.
#############################################################################
cfg:
identities:
passwordattempts: 10
###############################################################################
#
# Operations section
#
###############################################################################
operations:
# host and port for the operations server
listenAddress: 127.0.0.1:9443
# TLS configuration for the operations endpoint
tls:
# TLS enabled
enabled: false
# path to PEM encoded server certificate for the operations server
cert:
file:
# path to PEM encoded server key for the operations server
key:
file:
# require client certificate authentication to access all resources
clientAuthRequired: false
# paths to PEM encoded ca certificates to trust for client authentication
clientRootCAs:
files: []
###############################################################################
#
# Metrics section
#
###############################################################################
metrics:
# statsd, prometheus, or disabled
provider: disabled
# statsd configuration
statsd:
# network type: tcp or udp
network: udp
# statsd server address
address: 127.0.0.1:8125
# the interval at which locally cached counters and gauges are pushsed
# to statsd; timings are pushed immediately
writeInterval: 10s
# prefix is prepended to all emitted statsd merics
prefix: server
證書結構
fabric-ca-server init后產生的目錄結構如下：
.
├── IssuerPublicKey
├── IssuerRevocationPublicKey
├── ca-cert.pem
├── fabric-ca-server-config.yaml
├── fabric-ca-server.db
└── msp
└── keystore
├── 50664a3a04c5a7f354e88bbfdbda52051dc948f49ea5ffa79cf58423efedc52c_sk
├── IssuerRevocationPrivateKey
└── IssuerSecretKey
- ca-cert.pem 是根證書，證書包含用戶信息、公鑰和簽名
- msp/keystore/*_sk是根證書對應的私鑰
