6ES7 924-0BB00-0AB0?

TERMINAL BLOCK TP2, 2-TIER, 8 CHANNELS, FOR 2A DIGITAL OUTPUT MODULES, CONNECTION WITH FLAT RIBBON CABLE, SPRING TERMINALS

Fully modular

connection – fast

field connections

Modular “building block” provides the fastest

and most efficient system cabling

The fully modular connections link sensors and actuators

in the field to a SIMATIC S7 simply, quickly, and securely.

The connection consists of front connector modules for

the S7-1500 and S7-300, connecting cables and connection

modules to replace conventional terminal blocks with

additional functions for voltage and performance adaptation.

? Reduces wiring errors and testing times

? Uniform, clear connections

? No mix-up of individual wires

? Individual components can be replaced more quickly

and easily

? Up to 80% less wiring outlay

The flexible connection:

simple wiring in the

control cabinet

Clearly bundled individual wires

ensure full flexibility

The flexible connection enables sensors and actuators

mounted in the control cabinet to be connected to the

SIMATIC S7 more quickly and easily. To achieve this, the

front connector is prewired for connection to the digital I/O

assembly with 20 or 40 individual wires. The clearly labeled

individual cores at the other end of the wire bundle can

be routed to any element in the control cabinet.

? Bundled individual wires ensure clarity

? Connection security thanks to matching numbers printed

on wires and connecting points on the front connector

? Large cross sections make higher currents possible

? Up to 50% less wiring outlay

Cabling made easy:

SIMATIC TOP connect

To ensure constant functionality and availability of your electronic equipment, the

connections linking your individual components must be reliable and fault-free.

SIMATIC TOP connect offers an alternative solution to conventional single wiring with

terminal blocks, which is often complex, time-consuming and fault-prone.

SIMATIC TOP connect provides you with an innovative connection system for the

SIMATIC S7-1500 and S7-300 as well as for distributed I/Os SIMATIC ET 200MP and ET

200M, in two versions: the fully modular connection using the building block principle

and the flexible connection with pre-wired front connectors. The benefit for you:

both standardized cabling solutions lead to considerable time savings of up to 80%

and ensure a high wiring quality in a well-structured control cabinet. Simply a

TOP connection.

### 完全模塊化連接 – 快速現場連接 模塊化“積木”系統提供了最快和最有效的系統布線方式。 這種完全模塊化的連接將傳感器和執行器在現場簡單、快速且安全地連接到 SIMATIC S7。連接由 S7-1500 和 S7-300 的前連接器模塊、連接電纜和連接模塊組成，這些模塊取代了傳統的端子塊，并增加了電壓和性能適應的功能。 - 減少布線錯誤和測試時間 - 統一的、清晰的連接 - 不會混淆單根電線 - 可以更快、更容易地更換單獨的組件 - 最多減少 80% 的布線工作量 ### 靈活的連接：控制柜中的簡單布線 清晰的成束單根電線確保了完全的靈活性。 這種靈活的連接使得安裝在控制柜中的傳感器和執行器能夠更快、更容易地連接到 SIMATIC S7。為此，前連接器預先布線用于連接到帶有 20 或 40 根單根電線的數字 I/O 組件。成束電線另一端的清晰標記的單根線芯可以路由到控制柜中的任何元件。 - 成束的單根電線確保了清晰度 - 由于電線和前連接器上的連接點打印了匹配的編號，連接安全性得到了提高 - 較大的橫截面使得更高的電流成為可能 - 最多減少 50% 的布線工作量 ### 布線變得容易：SIMATIC TOP 連接 為了確保您的電子設備的持續功能和可用性，連接您各個組件的連接必須可靠且無故障。SIMATIC TOP 連接為傳統的帶有端子塊的單根布線提供了一種替代解決方案，這種布線方式通常復雜、耗時且容易出錯。 SIMATIC TOP 連接為您提供了兩種創新的連接系統：完全模塊化連接使用積木原則，以及帶有預布線前連接器的靈活連接。這兩種標準化布線解決方案都能節省高達 80% 的時間，并確保在結構良好的控制柜中具有高質量的布線。簡單來說，就是一個 TOP 連接。