- 首先在mac上安裝lrzsz命令
sudo brew install lrzsz
安裝完成后，通過以下命令進(jìn)行檢查是否安裝成功
ls -alh /usr/local/bin/sz
- 下載iterm2配置rzsz的配置腳本
sudo wget https://raw.github.com/mmastrac/iterm2-zmodem/master/iterm2-send-zmodem.sh
sudo wget https://raw.github.com/mmastrac/iterm2-zmodem/master/iterm2-recv-zmodem.sh
下載完后， 將腳本移到/usr/local/bin目錄下并個性其操作權(quán)限
sudo chmod 777 /usr/local/bin/itrem2-*
到些OK后， 就需要配置itrem2的終端了， 打開itrem2的首選項(xiàng)。profiles -> Advanced -> Triggers -> Edit 。添加二項(xiàng)tigger
1、**B0100 Run Silent Coprocess... /usr/local/bin/iterm2-send-zmodem.sh
2、**B00000000000000 Run Silent Coprocess... /usr/local/bin/iterm2-recv-zmodem.sh
完
