nginx源碼安裝,添加with-http_ssl_module, mac采坑記
首先,下載源碼,解壓,進nginx文件目錄,運行變以前的配置,這里因為需要nginx支持https服務,故需加上--with-http_ssl_module參數
./configure --with-http_ssl_module
- 錯誤1
./configure: error: the HTTP rewrite module requires the PCRE library.
You can either disable the module by using --without-http_rewrite_module
option, or install the PCRE library into the system, or build the PCRE library
下載pcre-8.40 解壓
tar -zxvf pcre-8.40.tar.gz
再次編譯
./configure --with-http_ssl_module --with-pcre=../pcre-8.40
- 錯誤2
./configure: error: SSL modules require the OpenSSL library.
You can either do not enable the modules, or install the OpenSSL library
into the system, or build the OpenSSL library statically from the source
with nginx by using --with-openssl=<path> option.
- 安裝最新的opensslhttps://www.openssl.org/
tar -zxvf openssl-1.0.2l.tar.gz
- 在nginx源碼中建立一個bundle目錄,并把最新的OpenSSL源碼復制進來
tangliang?local/opt/nginx-1.13.1? mkdir bundle [0:06:39]
tangliang?local/opt/nginx-1.13.1? cp -R ../openssl-1.0.2l ./bundle
3.再次運行
./configure --with-http_ssl_module --with-pcre=../pcre-8.40 --with-openssl=./bundle/openssl-1.0.2l --prefix=/usr/l
看似沒問題了,那就執行下一步把
make install
- 錯誤3
如果運行到此錯,算你運氣不好(暫時只在mac上出現了,在ubuntu上能順利通過),前面兩錯都得重新解決
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make[1]: *** [objs/nginx] Error 1
make: *** [install] Error 2
執行到這里,此錯事表示pcre的link階段出錯了
參考文檔
需要手動配置pcre的連接文件
因為之前是直接下載的源碼,對于pcre里面鏈接文件不好取到,所以這里用homebrew重新安裝pcre(之前下載的pcre包可以刪除了),(openssl不是必須的)
brew install pcre
brew install openssl
當取到最新的pcre包之后,鏈接文件就比較好拿到了,根據如下配置
重新生成編譯文件
export KERNEL_BITS=64
./configure --with-http_ssl_module --with-openssl=./bundle/openssl-1.0.2l --prefix=/usr/local/opt/nginx --with-cc-opt='-I/usr/local/Cellar/pcre/8.40/include/' --with-ld-opt='-L/usr/local/Cellar/pcre/8.40/lib'
最后一步
make install
不出意外,這次應該是ok了
為了使用方便,再為nginx添加一個軟連接
ln -s /usr/local/opt/nginx/sbin/nginx /usr/local/bin/nginx
